Bedienungsanleitung Pioneer DVR-660H-K (Seite 44 von 145) (Englisch)

544415

Zoom out

Zoom in

Vorherige Seite

1/145

Nächste Seite

Recording

Note

• If you set a DVD timer recording but

there is no recordable DVD disc loaded,

or the disc loaded doesn’t have enough

free space for the complete recording,

Recovery is shown. In this case (unless

you load a suitable disc before the

recording actually starts), the recorder

will use the HDD for recording. (The

message Can’t Rec will appear if there

are already 999 titles on the HDD or if

there is not enough free space on the

HDD for recording.)

•For a DVD timer recording, if Optimized

Rec (see Optimized Rec on page 117) is

set to On, the recorder wi

ll adjust the

recording quality to try and fit the

recording on the disc. If the recording

will not fit onto the disc even on MN1

(MN4 for DVD+R/+RW) recording

quality then the Recovery Recording

feature will automatically make the

recording to the HDD instead.

•If there is very little free space left on the

HDD, an Auto Replace Recording may

not complete successfully.

• If the HDD is being used for playback or

high-speed copying when an Auto

Replace Recording is due to start, the

new timer recording will not replace the

old one. However, the next time the timer

recordi

ng starts, both of the older two

programmes will be erased.

Editing a timer programme

You can change any of the settings in a timer

programme before the recording is due to

start.

1 Press HOME MENU, select Timer

Recording, then Timer Recording.

2 Highlight the timer programme you

want to change.

3 Press  then select ‘Modify’ from the

command menu panel.

Alternatively, press ENTER.

The Timer Programme Set screen appears

from which you can edit the settings.

4 Edit the timer recording settings as

necessary.

5 Select ‘Store Programme’ to finish.

Confirm the settings you made from the

following screen.

Deleting a timer programme

You can delete timer programmes you no

longer need.

1 Press HOME MENU, select Timer

Recording, then Timer Recording.

2 Highlight the timer programme you

want to erase.

3 Press  then select ‘Erase’ from the

command menu panel.

• Select Yes to confirm or No to cancel.

• You can also just press CLEAR when the

timer programme is highlighted.

Skipping a regular timer

programme

If you’ve set a regular daily or weekly timer

programme, you can set the recorder to skip

the next scheduled recording.

1 Press HOME MENU, select Timer

Recording, then Timer Recording.

2 Highlight the timer programme you

want to skip.

3 Press  then select ‘Cancel Once’

from the command menu panel.

•In the timer programme list, Cancel

Once appears by the programme.

• You can also just press  PAUSE when

the timer programme is highlighted.

Extending a timer recording in

progress

You can extend a timer recording beyond the

programmed end time in two different ways.

This can be useful if a broadcast programme

overruns, for example.

DVR660HK_KC_EN.book 44 ページ２００８年２月７日　木曜日　午後２時３４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer DVR-660H-K Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info