Bedienungsanleitung Pioneer RCS-606H-S (Seite 77 von 152) (Englisch)

573927

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Recording

English

Using the built-in TV tuner

There are three different ways to select TV channels. Note

that you can’t change the TV channel during playback,

recording or during recording standby.

• CHANNEL +/– buttons

• Number buttons

For example, to select channel 4, press 4 then

ENTER; for channel 34, press 3, 4, ENTER.

• CH +/– buttons on the front panel

Changing audio channels

You can change the audio channel of the broadcast or

external input signal.

• Press to change the audio type.

The current audio channel is displayed on-screen.

• If the NICAM audio setting (see NICAM Select on

page 130) is set to NICAM and you are watching a

NICAM broadcast, you can switch between NICAM

and Regular (non-NICAM) audio.

• If the NICAM broadcast is bilingual, you can also

select the language.

• You can also select the language for a non-NICAM

bilingual broadcast.

• When watching a recording made from an external

input with Bilingual recording selected (see External

Audio on page 130), you can switch the audio

channel between left (L), right (R) or both (L+R).

Note

• When recording to the HDD with HDD Recording

Format set to Video Mode On, to DVD in Video mode,

or on the LPCM setting, only one channel of a

bilingual broadcast is recorded. In this case, decide

which language you want to record before recording

by setting the Bilingual Recording setting (see

Bilingual Recording on page 130).

Switching between TV and DVD

When the recorder is stopped or recording you can

choose whether to have the audio/video from the built-in

TV tuner (or external input) play on your TV (‘DVD mode’),

or watch the channel that the TV is currently set to (‘TV

mode’).

During playback or when a menu is being displayed on-

screen, the sound and video is always routed to your TV

and is unaffected by the TV/DVD mode setting.

Note that the recorder must be connected to your TV

using a SCART cable to be able to use this feature.

• Switch between TV mode and DVD mode.

Setting the picture quality/recording

time

Before starting a recording, you will usually want to set

the picture quality/recording time. There are six standard

settings available, which allow you to choose a balance

between picture quality and recording time.

When Manual Recording is set to On (see Manual

Recording on page 132), a further option will be available

(MN1 to MN32 or LPCM, depending on what you set).

When recording to DVD+R/+RW, SLP is the longest

recording time available. If you select SEP or MN1 to

MN3, the recording mode will automatically revert to

SLP.

• Press repeatedly to select the recording

quality.

• XP – High quality setting, gives about one hour of

recording time on a DVD disc.

• SP (Standard Play) – Default quality, used for most

applications, gives about two hours of recording time

on a DVD.

• LP (Long Play) – Lower video quality than SP, but

doubles the recording time on a DVD to about four

hours.

Note

1. Channel presets are numbered 1 to 99.

ENTER

CHANNEL

–

SET UP

MCACC

ADVANCED

TEST TONE

/TUNE

ENTER

/TUNE

–

/ST

–

/ST

123

456

AUDIO

MAIN SUB

NICAM

Regular

NICAM A NICAM B

Regular

NICAM A+B

A (L) B (R)

A + B (L+R)

L+R

TV/DVD

DVD (VR) DVD (Video) DVD+R DVD+RW DVD-RAM HDD

REC MODE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer RCS-606H-S Seite 77

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer RCS-606H-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info