573928
126
Zoom out
Zoom in
Vorherige Seite
1/156
Nächste Seite
The Video Adjust menu
15
126
En
Chapter 15
The Video Adjust menu
Using the Video Adjust menu you can set up the picture
quality for the built-in tuner and external inputs, for disc
playback, and for recording.
Setting the picture quality for TV and
external inputs
Picture Creation lets you choose a set of picture quality
settings for the built-in TV tuner and for each external
input. There are several preset settings that suit various
sources, or you can create up to three of your own sets.
Choosing a preset
1 With the recorder stopped, press to
display the Home Menu.
2 Select ‘Video Adjust’.
Select the DV input by selecting DV then DV Video
Setting from the Home Menu.
3 Select a preset.
Use the VIDEO IN button to switch between the built-
in TV tuner and the external inputs (not possible if you
selected DV Video Setting in step 2 (above)).
Use the PREV/ NEXT buttons to change the
channel of the built-in TV tuner.
There are six presets available:
Tuner – suitable for general TV broadcasts
VCR – suitable for video cassettes
DTV/LDP – suitable for digital broadcasts and
Laserdiscs
Memory1 – user preset 1
Memory2 – user preset 2
Memory3 – user preset 3
You can press DISPLAY to see the individual settings for
the current preset (Tuner, VCR or DTV/LDP).
Creating your own set
There are three user presets in which you can save your
own set of picture quality settings.
1 Follow Choosing a preset above and select one of
the user presets (Memory 1, 2 or 3).
2 Select ‘Detailed Settings’.
3 Select the setting you want to adjust.
You can adjust the following settings:
Prog. Motion – Adjusts the motion and still picture
quality when video output is set to progressive.
PureCinema – This setting optimizes the picture for
film material when the video output is set to
progressive. Usually set to Auto; but try switching to
Off if the picture appears unnatural.
3-D Y/C – Adjusts the brightness / colour separation
(NTSC video input only).
YNR – Adjusts the amount of noise reduction (NR)
applied to the Y (brightness) component.
CNR – Adjusts the amount of noise reduction (NR)
applied to the C (colour) component.
White AGC – Turn on for automatic white level
adjustment.
1
White Level – Adjusts the intensity of white.
Black Level – Adjusts the intensity of black.
Black Setup – Corrects the standard reference black
level (NTSC video input only).
HOME MENU
ENTER
ENTER
Detailed Settings
Pr 1
Tuner
Note
1 When White AGC is On, the White Level setting can’t be adjusted.
ENTER
Detailed Settings
Pr 1
Memory1
ENTER
Memory1
3-D Y/C
Motion Still
PureCinma
Prog. Motion
Auto1
Motion Still
Pr 1
White Level
CNR
YNR
White AGC
Off
Max
Off
Off
Max
MaxMin
126

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Pioneer RCS-656HX wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Pioneer RCS-656HX

Pioneer RCS-656HX Bedienungsanleitung - Englisch - 156 seiten

Pioneer RCS-656HX Bedienungsanleitung - Dänisch - 464 seiten

Pioneer RCS-656HX Bedienungsanleitung - Französisch - 155 seiten

Pioneer RCS-656HX Bedienungsanleitung - Schwedisch, Finnisch - 464 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info