573928
128
Zoom out
Zoom in
Vorherige Seite
1/156
Nächste Seite
The Video Adjust menu
15
128
En
3 Select the picture quality setting you want to adjust.
You can adjust the following settings:
Prog. Motion – Adjusts the motion and still picture
quality when video output is set to progressive. (Prog.
Motion is ineffective when PureCinema is On.)
PureCinema – This setting optimizes the picture for
film material when the video output is set to
progressive. Usually set to Auto 1 but try switching
to Auto 2, On or Off if the picture appears unnatural.
Subtitle Adjust – When the video output is set to
progressive scan, it’s possible that the subtitles in
some movies will disappear unnaturally. In this case
select the On setting (only possible when connected
using HDMI).
YNR – Adjusts the amount of noise reduction (NR)
applied to the Y (brightness) component.
CNR – Adjusts the amount of noise reduction (NR)
applied to the C (colour) component (only possible
when connected using HDMI).
BNR – Adjusts the amount of noise reduction (NR)
applied to the block noise (artefacts visible in areas of
flat colour, caused by MPEG compression).
MNR – Adjusts the amount of noise reduction (NR)
applied to the mosquito noise (artefacts visible
around the edges of an image, caused by MPEG
compression).
Sharpness – Adjusts the sharpness of the high-
frequency (detailed) elements in the picture.
Detail – Adjusts how sharp edges appear.
White Level – Adjusts the intensity of white.
Black Level – Adjusts the intensity of black.
Black Setup – Corrects the standard reference black
level (NTSC video playback on the Interlace video
output setting only). (Black Setup is ineffective for
HDMI output.)
Gamma Correction – Adjusts the brightness of
darker images.
Hue – Adjusts overall balance between red and
green.
Chroma Level – Adjusts how rich the colours
appear.
4 Use the / buttons to adjust the currently
selected picture quality setting.
5 When you have all the settings as you want
them, press HOME MENU to exit.
Tip
To see more of the picture as you adjust different
settings, press ENTER after selecting the setting you
want to adjust.
YNR and Detail are ineffective for analog and
component video when the Video Priority Mode is set
to HDMI. Set to Component to make effective for
both analog and HDMI video. See page 137.
Memory1
Subtitle Adjust
YNR
Motion Still
PureCinma
Prog. Motion
Auto1
Off Max
Off Max
BNR
MNR
Max
Max
Off
Min
CNR
On
128

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Pioneer RCS-656HX wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Pioneer RCS-656HX

Pioneer RCS-656HX Bedienungsanleitung - Englisch - 156 seiten

Pioneer RCS-656HX Bedienungsanleitung - Dänisch - 464 seiten

Pioneer RCS-656HX Bedienungsanleitung - Französisch - 155 seiten

Pioneer RCS-656HX Bedienungsanleitung - Schwedisch, Finnisch - 464 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info