Bedienungsanleitung Pioneer RCS-656HX (Seite 130 von 156) (Englisch)

573928

130

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

The Initial Setup menu

130

Digital Tuner

Replace Channels Next Screen Scans for digital channels and replaces all the channel presets with the

results. Before the scan starts you will need to select your country.

After the scan is complete the recorder tells you whether any new channels

were found, and if so, how many.

(You can cancel the scan before it has ﬁnished by pressing HOME MENU

or RETURN/EXIT. In this case, no channels are set.)

If you execute a Replace Channels command, any timer recordings set for D.TV channels will be erased.

Add New Channels Next Screen Automatically scans for new digital channels.

After the scan is complete the recorder tells you whether any new channels

were found, and if so, how many.

(You can cancel the scan before it has ﬁnished by pressing HOME MENU

or RETURN/EXIT. In this case, no new channels are set.)

Channel Sort Next Screen Use this screen to sort channel presets into your preferred order. Use the

/// buttons to highlight the channel you want to move, press ENTER.

Use the cursor buttons again to highlight the position you want to move

the channel preset to, then press ENTER again.

(If there are more channel presets than will ﬁt on one screen, you can

select the next/previous page by highlighting the small triangular marks

and pressing ENTER.)

Channel Options Next Screen From this screen you can skip or lock channels. Locked channels will

require the correct password to be entered before the channel can be

watched. Use the /// buttons to highlight a preference box and

press ENTER to toggle the preference.

To enter this screen, input the parental lock password when prompted (if

one has not yet been set then the password you enter becomes the parental

lock password).

Auto Skip Off • No channels are automatically skipped.

Radio Radio channels are skipped when selecting channels.

Data Data channels are skipped when selecting channels.

Radio & Data Radio and data channels are skipped when selecting channels.

Signal Check Next Screen Use this screen to check the signal level and quality of digital channels.

Use the / buttons to change the RF channel; select Add New Channels

then press ENTER to scan for new channels; press HOME MENU to exit.

Aerial Power On Power is supplied to the connected aerial (antenna) when this recorder is

on or in standby.

Auto

Power is supplied to the connected aerial (antenna) only when this recorder

is on.

Off • This recorder does not supply power to the connected aerial (antenna).

• If the setting keeps reverting to Off when you try to set to On or Auto, the aerial may not be connected properly, or it may be shorted. In either

case, check the connection and try making the setting again.

D.TV Language Next Screen

From this screen you can set your Primary and Secondary Audio preference

for multilingual digital broadcasts, and your Primary and Secondary

Subtitle preference for programs that are broadcast with subtitles. Use

the / buttons to highlight a ﬁeld then use the / buttons to change it.

Setting Options Explanation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer RCS-656HX Seite 130

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer RCS-656HX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info