Bedienungsanleitung Pioneer SC-1223 (Seite 101 von 119) (Englisch)

536834

101

Zoom out

Zoom in

Vorherige Seite

1/119

Nächste Seite

101

FAQ

Network

Symptom Causes Remedies

Cannot access the network. The LAN cable is not firmly con-

nected.

Firmly connect the LAN cable (page 32).

The router is not switched on. Switch on the router.

Internet security software is cur-

rently installed in the connected

component.

There are cases where a component with Internet security

software installed cannot be accessed.

The audio component on the net-

work which has been switched off is

switched on.

Switch on the audio component on the network before

switching on this receiver.

Playback does not start

while “Connecting...” con-

tinues to be displayed.

The component is currently discon-

nected from this receiver or the

power supply.

Check whether the component is properly connected to

this receiver or the power supply.

The PC or Internet radio is

not properly operated.

The corresponding IP address is not

properly set.

Switch on the built-in DHCP server function of your router,

or set up the network manually according to your network

environment (page 88).

The IP address is being automati-

cally configured.

The automatic configuration process takes time. Please

wait.

The audio files stored on

components on the net-

work, such as a PC, cannot

be played back.

Windows Media Player 11 or

Windows Media Player 12 is not cur-

rently installed on your PC.

Install Windows Media Player 11 or Windows Media Player

12 on your PC (page 55).

Audio files recorded in MPEG-4

AAC or FLAC are being played back

on Windows Media Player 11 or

Windows Media Player 12.

Audio files recorded in MPEG-4 AAC or FLAC cannot be

played back on Windows Media Player 11 or Windows

Media Player 12. Try using another server. Refer to the

operation manual supplied with your server.

The component connected to the

network is not properly operated.

Check whether the component is affected by special cir-

cumstances or is in the sleep mode.

Try rebooting the component if necessary.

The component connected to the

network does not permit file sharing.

Try changing the settings for the component connected to

the network.

The folder stored on the component

connected to the network has been

deleted or damaged.

Check the folder stored on the component connected to

the network.

Network connections could be

restricted due to the computer’s net-

work settings, security settings, etc.

Check the computer’s network settings, security settings,

etc.

Supported file formats vary by server.

As such, files not supported by your

server are not displayed on this unit.

For more information check with the manufacturer of your

server.

The audio files are copyrighted. DRM-protected audio files cannot be played back on this

receiver.

Cannot access the com-

ponent connected to the

network.

The component connected to the

network is not properly set.

If the client is automatically authorized, you need to enter

the corresponding information again. Check whether the

connection status is set to “Do not authorize”.

There are no playable audio files on

the component connected to the

network.

Check the audio files stored on the component connected

to the network.

Symptom Causes Remedies

Audio playback is undesir-

ably stopped or disturbed.

The audio file currently being played

back was not recorded in a format

playable on this receiver.

Check whether the audio file was recorded in a format sup-

ported by this receiver.

Check whether the folder has been damaged or corrupted.

Note that there are cases where even the audio files listed

as playable on this receiver cannot be played back or

displayed (page 59).

The LAN cable is currently discon-

nected.

Connect the LAN cable properly (page 32).

There is heavy traffic on the network

with the Internet being accessed on

the same network.

Use 100BASE-TX to access the components on the net-

work.

When in the DMR mode, depending

on the external controller being used,

playback may be interrupted when a

volume operation is performed from

the controller.

In this case, adjust the volume from the receiver or remote

control.

There is a connection routed through

a wireless LAN on the same network.

There may be a shortage of bandwidth on the 2.4 GHz band

used by the wireless LAN. Make wired LAN connections not

routed through a wireless LAN.

Install away from any devices emitting electromagnetic

waves on the 2.4 GHz band (microwave ovens, game con-

soles, etc.). If this does not solve the problem, stop using

other devices that emit electromagnetic waves.

Cannot access Windows

Media Player 11 or

Windows Media Player 12.

In case of Windows Media Player

11: You are currently logged onto

the domain through your PC with

Windows XP or Windows Vista

installed.

In case of Windows Media Player

12: You are currently logged onto

the domain through your PC with

Windows 7 installed.

Instead of logging onto the domain, log onto the local

machine (page 56).

Cannot listen to Internet

radio stations.

The firewall settings for components

on the network are currently in

operation.

Check the firewall settings for components on the network.

You are currently disconnected from

the Internet.

Check the connection settings for components on the

network, and consult with your network service provider if

necessary (page 88).

The broadcasts from an Internet

radio station are stopped or inter-

rupted.

There are cases where you cannot listen to some Internet

radio stations even when they are listed in the list of Inter-

net radio stations on this receiver (page 56).

The Network functions

cannot be operated with

the buttons on the remote

control.

The remote control is not currently

set to the Network function mode.

Press NET to set the remote control to the Network func-

tion mode (page 56).

When the DMR mode or

AirPlay is used from a

computer, smartphone,

etc., the sound is played in

ZONE 2.

Play ZONE Setup is set to ZONE 2.

Change Play ZONE Setup to MAIN (page 91).

Pioneer SC-1223 Seite 101

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-1223

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info