Bedienungsanleitung Pioneer SC-1223 (Seite 99 von 119) (Englisch)

536834

Zoom out

Zoom in

Vorherige Seite

1/119

Nächste Seite

FAQ

HDMI

Symptom Remedy

The HDMI indicator blinks continu-

ously.

Check all the points below.

No picture or sound. This receiver is HDCP-compatible. Check that the components you are connecting are

also HDCP-compatible. If they are not, please connect them using the component or

composite video jacks.

Depending on the connected source component, it’s possible that it will not work with

this receiver (even if it is HDCP-compatible). In this case, connect using the component

or composite video jacks between source and receiver.

If the problem still persists when connecting your HDMI component directly to your

monitor, please consult the component or monitor manual or contact the manufacturer

for support.

If video images do not appear on your TV, try adjusting the resolution, Deep Color or other

setting for your component.

While analog video signals are being output over HDMI, use a separate connection for

audio output.

To output signals in Deep Color, use an HDMI cable (High Speed HDMI

Cable) to

connect this receiver to a component or TV with the Deep Color feature.

Influence from a TV whose power is set to standby may cause the picture or sound not to

be produced or to be broken. In this case, press HDMI OUT and switch so that the HDMI

output to which that TV is connected is not selected.

No picture.

Try changing the Resolution setting (in Setting the Video options on page 67).

To use the HDMI OUT 2 terminal in the main zone, set the MAIN/HDZONE

Output Setting to MAIN (page 91).

No sound, or sound suddenly

ceases.

Check that the HDMI Audio setting is set to AMP (Setting the Audio options on page 65).

If the component is a DVI device, use a separate connection for the audio.

If analog video is being output over HDMI, please use a separate connection for the

audio.

Check the audio output settings of the source component.

HDMI format digital audio transmissions require a longer time to be recognized. Due

to this, interruption in the audio may occur when switching between audio formats or

beginning playback.

Turning on/off the device connected to this unit’s HDMI OUT terminal during playback,

or disconnecting/connecting the HDMI cable during playback, may cause noise or inter-

rupted audio.

Noisy or distorted picture. Sometimes a video deck may output a noisy video signal (during scanning, for example),

or the video quality may just be poor (with some video game units, for example). The

picture quality may also depend on the settings, etc. of your display device. Switch off

the video converter and reconnect the source and display device using the same type of

connection (component or composite), then start playback again.

If the problem still persists when connecting your HDMI component directly to your

monitor, please consult the component or monitor manual or contact the manufacturer

for support.

HDCP ERROR shows in the display. Check whether or not the connected component is compatible with HDCP. If it is not

compatible with HDCP, reconnect the source device using a different type of connection

(component or composite). Some components that are compatible with HDCP still cause

this message to be displayed, but so long as there is no problem with displaying video,

this is not a malfunction.

Symptom Remedy

Synchronized operation not possible

using Control with HDMI function.

Check the HDMI connections.

The cable may be damaged.

Select ON for the Control Mode with HDMI setting (see HDMI Setup on page 61).

Turn the TV’s power on before turning on this receiver’s power.

Set the TV side Control with HDMI setting to on (see TV’s operating instructions).

Connect the TV to the HDMI OUT 1 terminal and set the HDMI output to OUT 1. Then

turn on first the TV’s power, then this receiver’s power.

When HDZONE is set to ON, the

video resolution and number of

audio channels for the main zone

side changes.

This is due to the HDMI connection specifications; it is not a malfunction. When play-

ing the same input in the main zone and HDZONE, video and audio signals that can be

output in common for all the devices connected to the HDMI OUT 1 and HDMI OUT 2

(HDZONE) terminals are set.

HDZONE cannot be turned on.

Set Output Setting at MAIN/HDZONE to HDZONE (page 91).

When the input source for the main

or HDZONE is switched or when

the power of the respective zones is

turned on and off, the audio or video

of the HDMI output terminal that is

not being operated is sometimes

interrupted.

This is because the HDMI devices need to recognize each other again. This is not a

malfunction. If the picture is disturbed or not displayed, turn off the power of the devices

in all the zones, then try again. Also try temporarily turning the Network Standby and

Standby Through settings OFF.

Such menus as the HOME MENU as

well as the on-screen display are not

displayed for HDMI OUT 1.

Press HDMI OUT and switch the HDMI OUT 1/2 setting.

MHL

Symptom Remedy

When playing an MHL-compat-

ible device connected to the

HDMI 5/MHL terminal, the Standby

Through function does not work and

the power turns off.

The MHL device will not operate unless power is being supplied from this receiver. When

this receiver is in the Standby Through mode, power cannot be supplied due to reduced

power consumption. Because of this, the MHL device will not operate. This is not a mal-

function.

AVNavigator

Symptom Causes Remedy

AVNavigator cannot be

installed.

An error message may appear

if there are not enough system

resources available.

Restart the computer and start installing with no other

applications running.

Installation of AVNavigator may fail

because of incompatibilities with

other applications.

Try the following (in given order):

1. If other applications are running on the computer, quit

those applications before installing.

2. If the problem persists, restart the computer and install

with no other applications running.

Pioneer SC-1223 Seite 99

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-1223

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info