Bedienungsanleitung Pioneer SC-LX704 (Seite 182 von 223) (Englisch)

699655

182

Zoom out

Zoom in

Vorherige Seite

1/223

Nächste Seite

182

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

Setting Item Default Value Setting Details

Surr Back Left 0.0 dB Select a value between "–12.0 dB" and "+12.0 dB"

(in 0.5 dB increments). Test tone output alternates

between this speaker and the benchmark Surround

Left speaker, so adjust the volume so it becomes

the same.

• Depending on the use of the ZONE speakers, it

may not be possible to select this setting.

Surr Back Right 0.0 dB Select a value between "–12.0 dB" and "+12.0 dB"

(in 0.5 dB increments). Test tone output alternates

between this speaker and the benchmark Surround

Back Left speaker, so adjust the volume so it

becomes the same.

• Depending on the use of the ZONE speakers, it

may not be possible to select this setting.

Subwoofer 1 0.0 dB Select a value between "–15.0 dB" and "+12.0 dB"

(in 0.5 dB increments). Test tone output alternates

between this subwoofer and the benchmark Front

Left speaker, so adjust the volume so it becomes

the same.

Subwoofer 2 0.0 dB Select a value between "–15.0 dB" and "+12.0 dB"

(in 0.5 dB increments). Test tone output alternates

between this subwoofer and the benchmark

Subwoofer1, so adjust the volume so it becomes

the same.

 Fine Speaker Distance

Make ne adjustments to the distance of the speakers from the listening position

while listening to the test pulse. After rstly setting the measured distance of the

Front Left speaker from the listening position, adjust the distance of the other

speakers, starting with the Front Right speaker. The test pulse is output from the

selected speaker and the benchmark speaker, so adjust the distance so the point

where the test pulse is heard is in the middle of the two speakers.

Setting Item Default Value Setting Details

Front Left 10' 0" / 3.00 m Set the measured distance of the Front Left

speaker from the listening position.

Front Right 10' 0" / 3.00 m The test pulse is output from this speaker and

the benchmark Front Left speaker, so adjust the

distance so the point where the test pulse is heard

is in the middle of the two speakers.

Center 10' 0" / 3.00 m The test pulse is output from this speaker and

the benchmark Front Left speaker, so adjust the

distance so the point where the test pulse is heard

is in the middle of the two speakers.

Height 1 Left 10' 0" / 3.00 m The test pulse is output from this speaker and

the benchmark Front Left speaker, so adjust the

distance so the point where the test pulse is heard

is in the middle of the two speakers.

• Depending on the use of the ZONE speakers, it

may not be possible to select this setting.

Height 1 Right 10' 0" / 3.00 m The test pulse is output from this speaker and the

benchmark Height 1 Left speaker, so adjust the

distance so the point where the test pulse is heard

is in the middle of the two speakers.

• Depending on the use of the ZONE speakers, it

may not be possible to select this setting.

Height 2 Left 10' 0" / 3.00 m The test pulse is output from this speaker and

the benchmark Front Left speaker, so adjust the

distance so the point where the test pulse is heard

is in the middle of the two speakers.

• Depending on the use of the ZONE speakers, it

may not be possible to select this setting.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SC-LX704 Seite 182

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-LX704

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info