699655
183
Zoom out
Zoom in
Vorherige Seite
1/223
Nächste Seite
183
Front Panel Rear Panel Remote
Contents
Connections
Playback
Setup
Setting Item Default Value Setting Details
Height 2 Right 10' 0" / 3.00 m The test pulse is output from this speaker and
the benchmark Front Right speaker, so adjust the
distance so the point where the test pulse is heard
is in the middle of the two speakers.
Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Surround Left 10' 0" / 3.00 m The test pulse is output from this speaker and
the benchmark Front Left speaker, so adjust the
distance so the point where the test pulse is heard
is in the middle of the two speakers.
Surround Right 10' 0" / 3.00 m The test pulse is output from this speaker and
the benchmark Front Right speaker, so adjust the
distance so the point where the test pulse is heard
is in the middle of the two speakers.
Surr Back Left 10' 0" / 3.00 m The test pulse is output from this speaker and the
benchmark Surround Left speaker, so adjust the
distance so the point where the test pulse is heard
is in the middle of the two speakers.
Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Surr Back Right 10' 0" / 3.00 m The test pulse is output from this speaker and the
benchmark Surround Right speaker, so adjust the
distance so the point where the test pulse is heard
is in the middle of the two speakers.
Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Subwoofer 1 10' 0" / 3.00 m The test pulse is output from this subwoofer and
the benchmark Front Left speaker, so adjust the
distance so the point where the test pulse is heard
is in the middle of the two speakers.
Subwoofer 2 10' 0" / 3.00 m The test pulse is output from this subwoofer and
the benchmark Subwoofer 1, so adjust the distance
so the point where the test pulse is heard is in the
middle of the two speakers.
• Default values vary depending on the regions.
Distance units can be switched by pressing MODE on the remote controller. When the unit
is set as feet, you can set between 0' 0" 1/2 and 30' 0" in increments of 1/2. When the unit
is set as meters, you can set between 0.01 m and 9.00 m in increments of 0.01 m.
Standing Wave
This controls the affect of the standing waves that occur when sound waves
reverberating off obstacles such as walls interfere with the original sound waves.
Setting Item Default Value Setting Details
Main 0.0dB Control the effect of standing waves for speakers
other than the center speaker and the subwoofer.
1. After selecting "Filter" with
/ , select the lter
to be adjusted from "1" to "3" with
/ and
press ENTER.
2. After selecting the central frequency with
/ ,
adjust the bandwidth with / , then adjust
the attenuation with / . The central frequency
can be selected between "63Hz" and "250Hz".
The bandwidth can be selected between "2.0"
and "9.8" (0.2 intervals). Attenuation can be
selected between "0.0dB" and "12.0dB" (0.5dB
intervals).
Center 0.0dB Control the effect of speaker standing waves for the
center speaker.
1. After selecting "Filter" with
/ , select the lter
to be adjusted from "1" to "3" with / and
press ENTER.
2. After selecting the central frequency with / ,
adjust the bandwidth with / , then adjust
the attenuation with / . The central frequency
can be selected between "63Hz" and "250Hz".
The bandwidth can be selected between "2.0"
and "9.8" (0.2 intervals). Attenuation can be
selected between "0.0dB" and "12.0dB" (0.5dB
intervals).
183

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Pioneer SC-LX704 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Pioneer SC-LX704

Pioneer SC-LX704 Kurzanleitung - Deutsch - 2 seiten

Pioneer SC-LX704 Bedienungsanleitung - Deutsch - 223 seiten

Pioneer SC-LX704 Kurzanleitung - Englisch, Holländisch - 2 seiten

Pioneer SC-LX704 Bedienungsanleitung - Holländisch - 223 seiten

Pioneer SC-LX704 Kurzanleitung - Französisch - 2 seiten

Pioneer SC-LX704 Bedienungsanleitung - Französisch - 223 seiten

Pioneer SC-LX704 Kurzanleitung - Italienisch - 2 seiten

Pioneer SC-LX704 Bedienungsanleitung - Italienisch - 223 seiten

Pioneer SC-LX704 Kurzanleitung - Spanisch - 2 seiten

Pioneer SC-LX704 Bedienungsanleitung - Spanisch - 223 seiten

Pioneer SC-LX704 Kurzanleitung - Schwedisch - 2 seiten

Pioneer SC-LX704 Bedienungsanleitung - Schwedisch - 223 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info