Bedienungsanleitung Pioneer SC-LX78-S (Seite 51 von 141) (Englisch)

580827

Zoom out

Zoom in

Vorherige Seite

1/141

Nächste Seite

Basic Setup

9 The Full Auto MCACC Setup procedure is completed and the Home Menu menu reappears

automatically.

Be sure to disconnect the microphone from this receiver upon completion of the Full Auto MCACC Setup.

The settings made in the Full Auto MCACC Setup should give you excellent surround sound from your system,

but it is also possible to adjust these settings manually using The MCACC PRO menu on page 94 or The

System Setup and Other Setup menus on page 102 .

! Depending on the characteristics of your room, sometimes identical speakers with cone sizes of around 12

cm (5 inches) will end up with different size settings. You can correct the setting manually using the Manual

speaker setup on page 103 .

! The subwoofer distance setting may be farther than the actual distance from the listening position. This set-

ting should be accurate (taking delay and room characteristics into account) and generally does not need to

be changed.

! If Full Auto MCACC Setup measurement results are incorrect due to the interaction of the speakers and view-

ing environment, we recommend adjusting the settings manually.

! The Dolby Enabled Speaker distance indicates the distance of the ceiling reflection. Therefore, it is longer

than the direct distance but you do not need to change this (page 23 ).

! When Full Auto MCACC or Auto MCACC is selected, all of the EQ adjustment values for Dolby Enabled

Speaker are set to 0 dB. You can adjust the settings manually.

Problems when using the Auto MCACC Setup

If the room environment is not optimal for the Auto MCACC Setup (too much background noise, echo off the

walls, obstacles blocking the speakers from the microphone) the final settings may be incorrect. Check for

household appliances (air conditioner, fridge, fan, etc.), that may be affecting the environment and switch them

off if necessary. If there are any instructions showing in the front panel display, please follow them.

! Some older TVs may interfere with the operation of the microphone. If this seems to be happening, switch off

the TV when doing the Auto MCACC Setup.

The Input Setup menu

You only need to make settings in the Input Setup menu if you didn’t hook up your digital equipment according

to the default settings (see Input function default and possible settings on page 52 ). In this case, you need to

tell the receiver what equipment is hooked up to which terminal so the buttons on the remote control correspond

to the components you’ve connected.

! With factory default settings, the on-screen display will be output from all HDMI output terminals and

displayed on any TV connected via HDMI cable. You can change where the screen is output in the

MAIN/HDZONE (page 109 ) and HDMI output (page 83 ) settings.

1 Press MAIN RECEIVER to switch the remote control to the receiver operation mode, and

then press HOME MENU.

A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the

screens and select menu items. Press RETURN to exit the current menu.

2 Select ‘System Setup’ from the HOME MENU.

3 Select ‘Input Setup’ from the System Setup menu.

A/V RECEIVER

ExitReturn

a . Manual SP Setup

b . Input Setup

c . OSD Language

d . Network Setup

e . HDMI Setup

f . MHL Setup

g . Other Setup

4.System Setup

4b.Input Setup

A/V RECEIVER

Exi

eturn

Input : DVD

Input Name : Rename

Audio In : COAX-1

HDMI Input : Input-1

Input Skip : OFF

Component In : In-1

12V Trigger 1 : OFF

12V Trigger 2 : OFF

4 Select the input function that you want to set up.

The default names correspond with the names next to the terminals on the rear panel (such as DVD or SAT/CBL

which, in turn, correspond with the names on the remote control.

5 Select the input(s) to which you’ve connected your component.

For example, if your DVD player only has an optical output, you will need to change the DVD input function’s

Audio In setting from COAX-1 (default) to the optical input you’ve connected it to.

6 When you’re finished, proceed to the settings for other inputs.

There are optional settings in addition to the assignment of the input jacks:

! Input Name – You can choose to rename the input function for easier identification. Select Rename to do so,

or Default to return to the system default.

! Input Skip – When set to ON, that input is skipped when selecting the input using ALL. (DVD and other

inputs can be still be selected directly with the input function buttons.)

! 12V Trigger 1/2 – After connecting a component to one of the 12 volt triggers (see Switching components on

and off using the 12 volt trigger on page 46 ), select MAIN, ZONE 2, ZONE 3, HDZONE or OFF for the cor-

responding trigger setting to switch it on automatically along with the (main or sub) zone specified.

— Devices connected to 12 volt triggers can be associated with HDMI OUT switching. For details, see HDMI

Setup on page 75 .

7 When you’re finished, press RETURN.

You will return to the System Setup menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SC-LX78-S Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-LX78-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info