Bedienungsanleitung Pioneer SC-LX87 (Seite 117 von 139) (Englisch)

536830

117

Zoom out

Zoom in

Vorherige Seite

1/139

Nächste Seite

117

FAQ

USB interface

Symptoms Causes Remedies

The folders/files stored on a

USB memory device are not

displayed.

The folders/files are currently stored

in a region other than the FAT (File

Allocation Table) region.

Store the folders/files in the FAT region.

The number of levels in a folder is

more than 9.

Limit the maximum number of levels in a folder to 9 (page

53).

The audio files are copyrighted.

Copyrighted audio files stored on a USB memory device

cannot be played back (page 53).

A USB memory device is

not recognized.

The USB memory device does not

support the mass storage class

specifications.

Try using a USB memory device compatible with the mass

storage class specifications. Note that there are cases

where even the audio files stored on a USB memory device

compatible with the mass storage class specifications are

not played back on this receiver (page 53).

Connect the USB memory device and switch on this

receiver (page 42).

A USB hub is currently being used.

This receiver does not support USB hubs (page 53).

This receiver recognizes the USB

memory device as a fraud.

Switch off and on again this receiver.

Reconnect the USB device with the receiver switched off.

Change to an input other than iPod/USB, then set the input

back to iPod/USB.

A USB memory device is

connected and displayed,

but the audio files stored

on the USB memory device

cannot be played back.

Some formats of USB memory

devices, including FAT 12, NTFS, and

HFS, cannot be played back on this

receiver.

Check whether the format of your USB memory device is

either FAT 16 or FAT 32. Note that the FAT 12, NTFS, and

HFS formats cannot be played back on this receiver (page

53).

The file format cannot be properly

played back on this receiver.

See the list of file formats that can be played back on this

receiver (page 54).

The USB memory cannot be

operated with the remote

control.

— Press iPod USB to set the remote control to the iPod USB

control mode.

iPod

Symptoms Causes Remedies

iPod is not recognized. This receiver recognizes the iPod as

a fraud.

Switch off and on again this receiver.

Reconnect the iPod with the receiver switched off.

Change to an input other than iPod/USB, then set the input

back to iPod/USB.

iPod touch/iPhone/iPad is

not recognized or otherwise

does not operate properly.

The iPod’s operation may be

unstable.

Try performing the operation below.

1. Press the sleep/sleep cancel button on the iPod touch/

iPhone/iPad simultaneously with the home button for at

least 10 seconds to restart the device.

2. Turn this receiver’s power on.

3. Connect the iPod touch/iPhone/iPad to this receiver.

iPod cannot be operated

with the remote control.

— Press iPod USB to set the remote control to the iPod USB

control mode.

Network

Symptoms Causes Remedies

Cannot access the network. The LAN cable is not firmly con-

nected.

Firmly connect the LAN cable (page 40).

The router is not switched on. Switch on the router.

Internet security software is cur-

rently installed in the connected

component.

There are cases where a component with Internet security

software installed cannot be accessed.

The audio component on the net-

work which has been switched off is

switched on.

Switch on the audio component on the network before

switching on this receiver.

Playback does not start

while “Connecting...” con-

tinues to be displayed.

The component is currently discon-

nected from this receiver or the

power supply.

Check whether the component is properly connected to

this receiver or the power supply.

The network function can-

not be operated with the

remote control.

— Press NET to set the remote control to the network function

control mode.

The PC or Internet radio is

not properly operated.

The corresponding IP address is not

properly set.

Switch on the built-in DHCP server function of your router,

or set up the network manually according to your network

environment (page 103).

The IP address is being automati-

cally configured.

The automatic configuration process takes time. Please

wait.

The audio files stored on

components on the net-

work, such as a PC, cannot

be played back.

Windows Media Player 11 or

Windows Media Player 12 is not cur-

rently installed on your PC.

Install Windows Media Player 11 or Windows Media Player

12 on your PC (page 66).

Audio files recorded in MPEG-4

AAC or FLAC are being played back

on Windows Media Player 11 or

Windows Media Player 12.

Audio files recorded in MPEG-4 AAC or FLAC cannot be

played back on Windows Media Player 11 or Windows

Media Player 12. Try using another server. Refer to the

operation manual supplied with your server.

The component connected to the

network is not properly operated.

Check whether the component is affected by special cir-

cumstances or is in the sleep mode.

Try rebooting the component if necessary.

The component connected to the

network does not permit file sharing.

Try changing the settings for the component connected to

the network.

The folder stored on the component

connected to the network has been

deleted or damaged.

Check the folder stored on the component connected to

the network.

Network connections could be

restricted due to the computer’s net-

work settings, security settings, etc.

Check the computer’s network settings, security settings,

etc.

Supported file formats vary by server.

As such, files not supported by your

server are not displayed on this unit.

For more information check with the manufacturer of your

server.

The audio files are copyrighted. DRM-protected audio files cannot be played back on this

receiver.

Pioneer SC-LX87 Seite 117

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-LX87

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info