Bedienungsanleitung Pioneer SE-C8TW (Seite 17 von 132) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch)

705889

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

5. Pairing

Pairing must be performed before the headphones can be used to listen to music

or communicate using a Bluetooth device.

For further details regarding the pairing procedure, consult the user’s manual for

your Bluetooth device.

(1) Remove the left and right earphones (units) from the charging case.

(2) Press the multifunction button on the left side until the mode becomes

pairing mode.

• The state when the LED lamp flashes blue and red alternately is pairing mode.

When it lights alternately, release the multifunction button.

(3) Press the multifunction button on the right side until the blue LED lights

and then ashes.

• When the blue LED on right earphone flashes three times, the power turns on

and the right earphone pairs with the left earphone automatically. (If there is

another connection device nearby, paring of the left and right units may not be

possible.)

• When in the pairing mode, if pairing is not completed within about 10

minutes,the power will automatically turn off.

(4) Turn on the power to the Bluetooth device you wish to pair with, and

begin pairing; search for this unit (wireless headphones) from the paired

Bluetooth device.

• Set the Bluetooth device close (within one meter) to the wireless headphones.

• These wireless headphones will appear in the Bluetooth device’s display as

«SE-C8TW».

(5) Conrm that pairing has been successfully completed with the Bluetooth

device.

• Look at the display for the Bluetooth-enabled device and select “SE-C8TW”.

• When the LED lamp is flashing in blue slowly about once every 3 seconds, pair-

ing is complete.

Connect to the Bluetooth device

• Turn on the power of each of the left and right units and perform the connection

operation on the other Bluetooth device.

When the power of the units turns on, the blue LED flashes three times.

• Depending on the device, connection between the wireless headphones and

Bluetooth device may be effected automatically after pairing.

Disconnecting from the Bluetooth device

• Press the multifunction button on either the right or left unit until the red LED

flashes three times to turn off the power.

If the operation is performed on one of the units, the power of both the left and

right units will turn off.

Note

• With some Bluetooth devices, the volume level may be maximized when pairing

with these earphones. Pairing should only be done while holding the earphones

in your hand. If you have these inserted in your ears during pairing you may be

subjected to loud volume causing possible hearing damage. After pairing adjust

the volume level down, using the Bluetooth device prior to placing earphones in

your ears.

• Depending on the device connected, the A2DP profile may need to be des-

ignated when playing music, and the HFP or HSP profiles for hands-free

communication.

• For details regarding operating and setting methods, consult the user’s manual

for the Bluetooth device.

• When a connection with the device becomes no longer possible, perform paring

again.

• These wireless headphones can record pairing information for up to 2 Bluetooth

devices. If pairing is performed for a 3 device, the information for the first paired

device will be overwritten and lost. If you wish to reconnect to that device on a

subsequent occasions, it will be necessary to repeat pairing with that device.

• Whenever using a device with which pairing has been performed, first turn on

the power to the wireless headphones, then perform the connection operation

for the paired Bluetooth device.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SE-C8TW Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info