705889
19
Zoom out
Zoom in
Vorherige Seite
1/132
Nächste Seite
En
7
7. Vocal communication
To use the wireless headphones for vocal communication, pairing must be per-
formed with the desired Bluetooth device using the “hands-free profile” (HFP) or
“headset profile” (HSP).
For details on how to perform pairing, see P.5.
* If the Bluetooth device supports both profiles HFP and HSP, use the profile HFP.
(1) Remove the left and right earphones (units) from the charging case.
(2) Press the left side and right side multifunction buttons until the blue LEDs
light and then ash.
• When the blue LEDs on the left side and right side flash three times, the power
turns on.
Pairing of the left side and right side is performed automatically when the power
turns on.
(3) Turn on the Bluetooth function on the device you wish to connect to.
• When pairing is completed, the wireless headphones will automatically connect
to the Bluetooth device.
* If automatic connection is not achieved, or the headphones automatically connect
to a different Bluetooth device than the one you wish to use, follow the instructions
for the desired Bluetooth device regarding manual connection.
Vocal communication controls
If the connected Bluetooth device supports AVRCP, the following operations can be
used.
• L side Multi-function button
Press once when receiving a message : Enables conversation. Press once
again to end conversation.
Press and hold when receiving a message : Refuse communication.
The same controls are supported in the event a call is received while listening to
music.
* When a call is received, you cannot answer it by operating the right side multifunc-
tion button. Perform the operation with the left side multifunction button.
* Adjust the volume with the paired Bluetooth device.
* With some Bluetooth devices, the volume level may be maximized when pairing
with these earphones.
After pairing adjust the volume level down, using the Bluetooth device prior to plac-
ing earphones in your ears.
* Depending on the specifications of the connected Bluetooth device, the controls
noted above and controls on the Bluetooth device may not be supported.
* Depending on the specifications of the connected Bluetooth device, the phone
settings may need to be configured. Consult the user’s manual for the Bluetooth
device.
19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Pioneer SE-C8TW wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info