Bedienungsanleitung Pioneer VSA-AX10i-S (Seite 36 von 104) (Englisch)

574062

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Getting started

4 ‘Auto Surround Setup’ should be highlighted.

Press ENTER.

5 Specify how you are using your speaker system.

Highlight ‘Go Next’ then press ENTER.

If you are using a normal surround setup, or if you’re not

sure, leave the settings at their default:

• Speaker System Select – Normal Surround

• SP-B (speaker system B) – Second Zone

• X-Curve – ON

For settings other than the default, see Speaker Systems

on page 52.

6 Follow the instructions on-screen.

• Make sure the microphone is connected.

• If you’re using a subwoofer, switch it on and turn up

the volume.

• See below for notes regarding high background

noise levels and other possible interference.

7 Make sure ‘Start’ is selected, then press ENTER.

A progress report is displayed on-screen while the

amplifier outputs test tones to determine the speakers

present in your setup. Try to be as quiet as possible while

it’s doing this.

• Do not to turn down the volume during the test tones.

This may result in incorrect speaker settings.

8 Confirm the speaker configuration in the OSD.

The configuration shown on-screen should reflect the

actual speakers you have.

If the speaker configuration displayed isn’t correct, use

the / (cursor up/down) buttons to select Retry, then

press ENTER. Follow the instructions from step 6.

If the configuration is incorrect and you want to input the

settings manually, select ERRFix SP then press

ENTER. Use / (cursor up/down) to select the speaker

then / (cursor left/right) to specify the size (and

number for surround back). When you’re finished, go to

the next step.

If you see an ERR message in the right side column, there

may be a problem with the speaker connection. If

selecting Retry (above) doesn’t fix the problem, turn off

the power and check the speaker connections.

9 Make sure ‘OK, Go Next’ is selected, then press

ENTER.

A progress report is displayed on-screen while the

amplifier outputs more test tones to determine the

optimum amplifier settings for channel level, speaker

distance, and acoustic calibration EQ.

Again, try to be as quiet as possible while this is

happening. It may take up to 6 minutes.

System Setup

[ Auto Surround Setup ]

[1. Input Assign]

[2. Surround Setup]

[3. Expert Setup]

[4. THX Audio Setup]

[Exit]

Auto Surround Setup

Speaker System Select

[ Normal Surround ]

SP–B [Second Zone]

X–Curve [ ON ]

[Go Next]

[Return]

Auto Surround Setup

•Connect microphone

•Please be quiet

•Move obstacles away

•If you have a subwoofer

turn power on and

turn volume up

[Start]

[Cancel]

Auto Surround Setup

Please Wait

Caution!!

Test tone is

output loudly.

[Cancel]

Auto Surround Setup

Now Analyzing

•••

Environment Check

Ambient Noise [OK]

Microphone [OK]

Speaker Level [OK]

[Cancel]

Check!!

FRONT [ YES ]

CENTER [ YES ]

SURROUND [ YES ]

SURR BACK [ YES

SUB WOOFER

[ YES ]

[OK,Go Next]

[Retry]

[ERR Fix SP.]

[Return to Menu]

Auto Surround Setup

Please Wait

Caution!!

Test tone is

output loudly.

[Cancel]

Auto Surround Setup

Now Analyzing

•••

Surround Analysis

Speaker Systems [OK]

Speaker Distance [OK]

Channel Level [OK]

Acoustic Cal EQ [OK]

[Cancel]

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSA-AX10i-S Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSA-AX10i-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info