Bedienungsanleitung Pioneer VSA-AX10i-S (Seite 37 von 104) (Englisch)

574062

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Getting started

10 The Auto Surround Setup has finished! Press

SYSTEM SETUP to exit the System Setup menu.

The settings made in the Auto Surround Setup should

give you excellent surround sound from your system, but

it is also possible to adjust these settings manually using

the Surround Setup menu (starting on page 51).

If you plan to go on and make advanced settings at this

point, you can select Data Copy to start customizing

your surround sound settings. See Acoustic Calibration

EQ on page 55 for more on this.

You can also choose to view all the settings by selecting

Check. See Checking your surround settings on page 60

for more on this.

If you selected Return, you can select Exit to leave the

System Setup menu screen.

Note

• If you select Cancel at any time during the Auto

Surround Setup, the amplifier automatically exits

and no settings will be made.

• Remember to disconnect the microphone after

you’ve finished the Auto Surround Setup.

Other problems when using the Auto

Surround Setup

If the room environment is not optimal for the Auto

Surround Setup (too much background noise, echo off

the walls, obstacles blocking the speakers from the

microphone) the final settings may be incorrect. Check

for household appliances (air conditioner, fridge, fan,

etc.), that may be affecting the environment and switch

them off if necessary.

Some older TVs may interfere with the operation of the

microphone. If this seems to be happening, switch off the

TV when doing the Auto Surround Setup.

Checking the settings on your DVD

(or other) player

Before continuing, you may want to check the digital

audio output settings on your DVD player and digital

satellite amplifier.

• Check that your DVD player/satellite amplifier is

set to output Dolby Digital, DTS and 88.2/96kHz PCM

(2 channel) audio.

If there is an option for MPEG audio, set this to convert

the MPEG audio to PCM.

If you connected the multichannel analog outputs of the

player to this amplifier, make sure that the player is set to

output multichannel analog audio.

Note

• Depending on your DVD player or source discs you

may only be able to output analog and stereo digital

audio. In this case you need to change the listening

mode to SURROUND if you want multichannel

surround sound.

Playing a source

Here are the basic instructions for playing a source (such

as a DVD disc) with your home theater system.

1 Turn on the power of the playback component

(for example a DVD player), your TV and subwoofer

(if you have one).

• If your source is the TV’s built-in tuner, then switch to

the channel you want to watch, otherwise make sure

that the TV’s video input is set to this amplifier. (For

example, if you connected this amplifier to the VIDEO

1 jacks on your TV, make sure that VIDEO 1 input is

now selected.)

2 If the amplifier isn’t already on, press 

AMPLIFIER to switch it on.

Auto Surround Setup

! ! Complete ! !

[Data Copy]

[Check]

[Return]

HOME

SYSTEM

OFF

CONT

MULTI

OPERATION

/ DVD

DVD

/ LD

DVR

/ VCR1

SAT

INPUT 1 2 3

CD TUNER

SETUP

AMPLIFIER

1/3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSA-AX10i-S Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSA-AX10i-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info