Bedienungsanleitung Pioneer VSA-AX10i-S (Seite 55 von 104) (Englisch)

574062

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

The Surround Setup menu

Speaker Distance

For good sound depth and separation from your system,

you need to specify the distance of your speakers from

the listening position. The amplifier can then add the

proper delay needed for effective surround sound.

1 Select ‘Speaker Distance’ then press ENTER.

2 Select a setup option and press ENTER.

• Manual – Select each speaker in turn and adjust the

distance manually.

• Auto – The speaker distances are set automatically

by the amplifier as it outputs test tones. (For this

setup you must have the mic connected.)

3 If you selected ‘Auto’, select ‘Start’ and press

ENTER. If you selected ‘Manual’, adjust the distance

of each speaker using the / (cursor left/right)

hard keys.

Using the Manual setup, you can adjust the distance of

each speaker in 0.05 meter increments.

With the Auto setup, !! Complete !! is displayed on-

screen after the speaker distances are set. If you want to

check the settings, select Check and press ENTER.

4 Select ‘Return’ then press ENTER to finish.

Tip

• For best surround sound, make sure the surround

back speakers are the same distance.

Acoustic Calibration EQ

Acoustic Calibration Equalization is a kind of room

equalizer for your speakers (excluding the subwoofer). It

works by measuring the acoustic characteristics of your

room and neutralizing the ambient characteristics that

can color the original source material. You can also make

these settings manually to get a frequency balance that

suits your tastes. A more advanced setup is also

available, where you can make detailed settings

according to your room’s reverb characteristics (see

Professional Acoustic Calibration EQ on page 57). You

should have the mic connected when using any of the

setup options.

Setting the Acoustic Calibration EQ automatically

1 Select ‘Acoustic Cal EQ’ then press ENTER.

2 Select ‘Auto’ then press ENTER.

As the amplifier outputs test tones, the frequency

balance is adjusted automatically for the following

settings:

• ALL CH ADJ – All the speakers are set individually so

no special weighting is given to any one channel.

• FRONT CH ALIGN – All speakers are set in

accordance with the front speaker settings.

!! Complete !! is displayed on-screen after the acoustic

calibration equalization is set. If you want to check the

settings, select Check and press ENTER.

3 Select ‘Return’ then press ENTER to finish.

Setting the Acoustic Calibration EQ manually

Before manually adjusting the Acoustic Calibration EQ,

we recommend copying the ALL CH ADJ or the FRONT

CH ALIGN settings from the Auto setup above (or from

Introduction to home theater on page 35) to one of the

custom settings. Instead of just a flat EQ curve, this will

give you a reference point from which to start (see

Copying your Acoustic Calibration EQ settings below for

how to do this).

1 Select ‘Acoustic Cal EQ’ then press ENTER.

2.Surround Setup

[ Check ]

[ 1.Speaker Systems ]

[ 2.Channel Level ]

[ 3.Speaker Distance ]

[ 4.Acoustic Cal EQ ]

[ 5.X-Curve ]

[Return]

2.3. Speaker Distance

[Manual]

[Auto]

[Return]

Your Speaker Systems

Normal Surround ”

2.Surround Setup

[ Check ]

[ 1.Speaker Systems ]

[ 2.Channel Level ]

[ 3.Speaker Distance ]

[ 4.Acoustic Cal EQ ]

[ 5.X-Curve ]

[Return]

2. 4. Acoustic Cal EQ

[Data Copy]

[Manual]

CUSTOM1 , CUSTOM2

[Auto]

ALL ADJ & FRONT ALIGN

[Professional]

[Return]

2.Surround Setup

[ Check ]

[ 1.Speaker Systems ]

[ 2.Channel Level ]

[ 3.Speaker Distance ]

[ 4.Acoustic Cal EQ ]

[ 5.X-Curve ]

[Return]

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSA-AX10i-S Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSA-AX10i-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info