Bedienungsanleitung Pioneer VSA-AX10i-S (Seite 56 von 104) (Englisch)

574062

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

The Surround Setup menu

2 Select ‘Manual’ then press ENTER.

3 Select CUSTOM1 or CUSTOM2 then press ENTER.

4 Select the channel you want, adjust the

frequency curve to your liking, then move to the

next speaker.

Use the / (cursor left/right) hard keys to select the

channel, then ENTER to select it.

Use the / (cursor left/right) hard keys to select the

frequency and / (cursor up/down) to boost or cut the

EQ. When you’re finished, press ENTER to move to the

next channel.

Tip

• Changing the frequency curve of one channel too

drastically will affect the overall balance. If the

speaker balance seems uneven, you can raise or

lower channel levels using test tones with the TRIM

feature. Use  (cursor right) to move to the far right

side of the OSD, then use / (cursor up/down) to

raise or lower the channel level for the current

speaker.

5 When you’re done, press  (cursor down) to

select ‘Return’ then press ENTER to finish.

Note

• If the message OVER !! appears on-screen, it means

the frequency curve may result in distortion from the

speaker. Adjust the frequency curve accordingly.

Copying your Acoustic Calibration EQ settings

If you want to manually adjust the Acoustic Calibration

EQ (see Setting the Acoustic Calibration EQ manually

above), we recommend copying the ALL CH ADJ or the

FRONT CH ALIGN settings from the Auto setup above

(or from Introduction to home theater on page 35) to one

of the custom settings. Instead of just a flat EQ curve, this

will give you a reference point from which to start.

1 Select ‘Acoustic Cal EQ’ then press ENTER.

2 Select ‘Data Copy’ then press ENTER.

3 Select CUSTOM1 or CUSTOM2 then use the /

(cursor left/right) hard keys to select the setting you

want to copy.

• You can also copy from one custom setting to

another. For more on the ALL CH ADJ and FRONT CH

ALIGN settings, see Setting the Acoustic Calibration

EQ automatically above.

4 Select ‘Copy OK’ and press ENTER to confirm.

You will be taken to the Acoustic Calibration EQ settings

menu. Select Return then press ENTER to go back to the

Surround Setup menu.

2. 4. Acoustic Cal EQ

[Data Copy]

[Manual]

CUSTOM1 , CUSTOM2

[Auto]

ALL ADJ & FRONT ALIGN

[Professional]

[Return]

2.4. Acoustic Cal EQ

[ CUSTOM1 ]

A[ CUSTOM2 ]

[Return]

Manual

125

250

500

16k

TRIM

2.4. Acoustic Cal EQ

Manual

Target Curve : CUSTOM1

Channel [L•SMALL]

[Return]

2.Surround Setup

[ Check ]

[ 1.Speaker Systems ]

[ 2.Channel Level ]

[ 3.Speaker Distance ]

[ 4.Acoustic Cal EQ ]

[ 5.X-Curve ]

[Return]

2. 4. Acoustic Cal EQ

[Data Copy]

[Manual]

CUSTOM1 , CUSTOM2

[Auto]

ALL ADJ & FRONT ALIGN

[Professional]

[Return]

2.4. Acoustic Cal EQ

[ CUSTOM1 ]

A[ CUSTOM2 ]

[Return]

Manual

2.4. Acoustic Cal EQ

A.Cal EQ Data Copy

To ← From

CUSTOM1 [ ALL ADJ ]

CUSTOM2 [CUSTOM2 ]

[Copy OK]

[Cancel]

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSA-AX10i-S Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSA-AX10i-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info