Bedienungsanleitung Pioneer VSA-AX10i-S (Seite 86 von 104) (Englisch)

574062

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Advanced setup

4 Select the setting you want to adjust.

• OSD Adjustment – Adjust the position of the on-

screen display on your TV.

• Bass Peak Level – Prevent bass tones from distorting

the sound from your speakers.

• D-Range Control – Specify the amount of dynamic

range adjustment to Dolby Digital soundtracks.

• Function Rename – Change the names that appear

on the amplifier display and on-screen display.

• OSD Overlay – Switch the on-screen display (for

basic functions) on or off.

• 12V Trigger – Specify which components are

switched on or off using the 12 volt trigger.

5 Make the adjustments necessary for each

setting, pressing ENTER to confirm after each screen.

When you’re finished, you can select Return, then press

ENTER to go back to the System Setup menu.

OSD Adjustment

Use this feature to adjust your TV display if it seems

difficult to see all the instructions on the screen.

1 Select ‘OSD Adjustment’ from the Expert Setup

menu.

2 Use the /// hard keys to move the

display field around until you get one that you feel

best suits your TV.

You can move the screen displays up or down and left or

right to get the best match for your TV.

3 Press ENTER.

You will return to the Expert Setup menu.

Bass Peak Level

Some audio sources (for example, Dolby Digital and DTS)

include ultra-low bass tones. Set the bass limiter as

needed to prevent the bass from distorting the sound.

Note

• Since THX Ultra2 subwoofers use a bass limiter to

control bass peaks, you won’t be able to select this

setting if you set up your system using the THX Ultra2

Subwoofer Setup on page 89.

1 Select ‘Bass Peak Level’ from the Expert Setup

menu.

The current setting is displayed.

• When [- - -] is displayed, no bass is output.

• When [OFF] is displayed the attenuator is off (bass

output is not affected).

2 Select a setup option.

• Setting Start – The volume is set to MIN (----dB), a

test tone plays back and you make the setting.

• Setting Cancel – Switches limiting off.

3 If you selected ‘Setting Start’, use the /

(cursor left/right) hard keys to adjust the test tones

and specify the bass peak level then press ENTER.

Set the bass peak level gradually, then press ENTER at

the point just before the tone starts to distort. When

you’re finished, the display on the amplifier will show

RESUME and the volume will return to its original

position.

• If the YES or PLUS setting on the subwoofer is

selected (in Speaker Systems on page 52), the test

tone will only play back from the subwoofer. If not, the

test tone will play back from the front and surround

speakers set to LARGE.

4 When you're finished, select RETURN and press

ENTER.

You will return to the Expert Setup menu.

3.Expert Setup

[1. OSD Adjustment ]

[2. Bass Peak Level ]

[3. D-Range Control ]

[4. Function Rename ]

[5. OSD Overlay ]

[6. 12V Trigger ]

[Return]

3.1. OSD Adjustment

[Return]

3.2. Bass Peak Level

Manager

[Setting Start]

[Setting Cancel]

[Return]

Present Level [OFF]

3.2. Bass Peak Level

Manager

[Setting OK]

Bass Peak Level

[–10]

[Setting Cancel]

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSA-AX10i-S Seite 86

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSA-AX10i-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info