Bedienungsanleitung Pioneer VSA-AX10i-S (Seite 84 von 104) (Englisch)

574062

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Advanced setup

4 When you're finished, select RETURN and press

ENTER.

You will return to the Input Assign menu.

Assigning the component video inputs

• Default settings:

Component 1 – OFF

Component 2 – OFF

Component 3 – OFF

If you used component video cords to connect your video

equipment you must tell the amplifier which device it is,

or else you may see the S-video or composite video input

instead of the component video signal.

1 Select ‘Component Video In’ from the Input

Assign menu and press ENTER.

2 Select the number of the component video input

to which you’ve connected your video player.

The numbers correspond with the numbers beside the

inputs on the back of the amplifier.

3 Use the / (cursor left/right) hard keys to

select the component that corresponds with the one

you connected to that input.

• If you connect the TV monitor with component video

cord, and the DVD player with composite or S video

cord then you should set that terminal to OFF.

4 When you're finished, select RETURN and press

ENTER.

You will return to the Input Assign menu.

Assigning the i.LINK inputs

If you assign i.LINK-equipped components to an input

(for example DVD/LD), you will be able to select both

audio and video signals from i.LINK-equipped

components using the INPUT button (or INPUT

SELECTOR dial on the front panel). Assigning i.LINK

sources also allows you to keeps the sound settings

you’ve made for other input functions.

1 Select ‘i.LINK Input’ from the Input Assign menu

and press ENTER.

If no i.LINK-equipped components are connected i.LINK

Input cannot be selected.

2 Select an i.LINK-equipped component.

When a number of i.LINK-equipped components are

connected to your amplifier, the i.LINK-equipped

component you are looking for might be listed on

additional display screens.

• i.LINK is displayed after unassigned device names

(e.g. DV-868AVi [i.LINK]).

• If a connected devices cannot output (playback) a

source using the i.LINK connection, [- - - -] is

displayed after the input device name (e.g. DV-

868AVi [- - - -]). Non-compatible devices cannot be

assigned to inputs.

• When the cables for an assigned input device

become loose or the power is cut to the device, an

asterisk (*) appears before the device name (e.g.

*DV-868AVi [CD]).

3 Use the / (cursor left/right) hard keys to

select the component that you want to assign.

When you assign an i.LINK-equipped video component,

select the input source to which you have connected the

video signal from the component.

• If you assign an i.LINK input to a certain function (for

example DVD/LD) then any digital inputs previously

assigned to that function will automatically be set to

i.LINK (not assigned).

• TUNER and PHONO inputs cannot be assigned.

4 When you're finished, select RETURN and press

ENTER.

You will return to the Input Assign menu.

1.Input Assign

[ 1.Digital In ]

[ 2.Component Video In ]

[ 3.i.LINK In ]

[ 4.Video Assign ]

[Return]

1.2. Component Video In

Component 1 [DVD/LD ]

Component 2 [ OFF ]

Component 3 [ OFF ]

[Return]

1.Input Assign

[ 1.Digital In ]

[ 2.Component Video In ]

[ 3.i.LINK In ]

[ 4.Video Assign ]

[Return]

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSA-AX10i-S Seite 84

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSA-AX10i-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info