Bedienungsanleitung Pioneer VSA-AX10i-S (Seite 83 von 104) (Englisch)

574062

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Advanced setup

Chapter 10

Advanced setup

The Input Assign menu

You only need to make settings in the Input Assign menu

if you didn’t hook up your digital equipment according to

the default settings for the digital inputs, or if you have

connected equipment using component video or i.LINK

cables.

To access the Input Assign menu, follow the steps below.

1 Make sure your amplifier and TV are both

switched on.

2 Using the remote control, press AMPLIFIER on

the touch screen, then press the SYSTEM SETUP

button.

An on-screen display (OSD) appears on your TV. Use the

/// hard keys and ENTER on the remote control

to navigate through the screens and select menu items.

• The / (cursor up/down) hard keys select menu

items and the / (cursor left/right) hard keys

change the setting of the item selected.

3 Select ‘Input Assign’ then press ENTER.

The Input Assign menu appears on screen:

Assigning the digital inputs

• Default settings:

Digital-1 (coaxial) – DVD/LD

Digital-2 (coaxial) – TV/DVD

Digital-3 (coaxial) – CD

Digital-4 (optical) – SAT

Digital-5 (optical) – DVR (/VCR1)

Digital-6 (optical) – CD-R (/TAPE1/MD)

2 RF (coaxial) – DVD/LD

You only need to do this if you didn’t hook up your digital

equipment according to the default settings for the

digital inputs (see above). This setting tells the amplifier

what digital equipment is hooked up to which terminal so

the buttons on the remote correspond to what you have

hooked up.

1 Select ‘Digital In’ from the Input Assign menu

and press ENTER.

2 Select the number of the digital input to which

you’ve connected your digital component.

The numbers correspond with the numbers beside the

inputs on the back of the amplifier.

3 Use the / (cursor left/right) hard keys to

select the component that corresponds with the one

you connected to that input.

Select between DVD/LD, TV/DVD, SAT, DVR, VCR 2,

VCR 3, CD or CD-R (however, the RF IN setting doesn't

include CD or CD-R).

• If you assign a digital input to a certain function (for

example, DVD/LD) then any digital inputs previously

assigned to that function will automatically be

switched off.

AV AMPLIFIER

MENU MUTE

CHANNEL VOLUME

SYSTEM

SETUP

ENTER

HOME

SYSTEM

OFF

CONT

MULTI

OPERATION

/ DVD

DVD

/ LD

DVR

/ VCR1

SAT

INPUT 1 2 3

CD TUNER

SETUP

AMPLIFIER

1/3

System Setup

[Auto Surround Setup]

[1. Input Assign ]

[2. Surround Setup ]

[3. Expert Setup ]

[4. THX Audio Setup ]

[Exit]

1.Input Assign

[ 1.Digital In ]

[ 2.Component Video In ]

[ 3.i.LINK In ]

[ 4.Video Assign ]

[Return]

1.Input Assign

[ 1.Digital In ]

[ 2.Component Video In ]

[ 3.i.LINK In ]

[ 4.Video Assign ]

[Return]

1.1. Digital-In

Digital-1 [ DVD/LD ]

Digital-2 [ TV/DVD ]

Digital-3 [ CD ]

Digital-4 [ SAT ]

Digital-5 [ DVR ]

Digital-6 [ CD-R ]

RF IN [ DVD/LD ]

[Return]

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSA-AX10i-S Seite 83

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSA-AX10i-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info