Bedienungsanleitung Pioneer VSA-AX10i-S (Seite 98 von 104) (Englisch)

574062

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Additional information

i.LINK interface

i.LINK messages

You may see the following messages displayed in the front panel display when using the i.LINK interface.

When playing a disc, the

2 Pro Logic II or Neo:6

indicator lights on the ampliﬁer.

• The input signal type is set to analog. • Set the ampliﬁer to AUTO or DIGITAL (see Selecting the

input signal type on page 44).

• A 2 channel soundtrack is currently playing. • This is not a malfunction. Check the disc packaging for

details of the audio formats available on the disc.

• The soundtrack currently playing is

encoded using Dolby Surround.

• This is not a malfunction. Check the disc packaging for

details of the audio formats available on the disc.

During playback of a Surround

EX or DTS ES source on the

Stream Direct or SB CH AUTO

setting, the EX and ES indicators

don’t light, or the signal is not

properly processed.

•The source may be Dolby Surround EX / DTS

ES software, but it has no ﬂag to indicate it is

6.1 compatible.

• Switch the surround back channel setting (page 46) to

SB CH ON then switch to the THX Surround EX or

Standard EX listening mode (see Listening in surround

sound on page 39).

Symptom Cause Remedy

No sound is output. • An output signal is not produced from the

i.LINK connector on the source player.

• Refer to the manual that came with the source player.

• The selected component is not compatible

with i.LINK audio.

• Refer to the manual that came with the source player.

• The input signal is set to 2RF, DIGITAL or

ANALOG.

• Select i.LINK or AUTO using the SIGNAL SELECT

button (see Selecting the input signal type on page 44).

i.LINK indicator does not light up

even when an i.LINK-equipped

component is selected.

• The 2RF, DIGITAL or ANALOG input

signal is selected.

• Select i.LINK or AUTO using the SIGNAL SELECT

button (see Selecting the input signal type on page 44).

The program format indicators

don’t disappear when SACD

playback stops.

• The program format indicators remain lit

until another format source is input.

• This is not a malfunction.

You cant get i.LINK to display

when using the SIGNAL SELECT

button.

• i.LINK-equipped component(s) are not

ready.

• Turn on the component(s).

• i.LINK input setting is incorrect. • Select the correct i.LINK input setting (see Assigning

the i.LINK inputs on page 84).

After upgrading a component, it

is not recognized and cannot be

selected using the i.LINK

connection.

• Depending on the upgrade process, certain

components may cease to be recognized by

the ampliﬁer.

• You may need to reset the i.LINK database memory in

the ampliﬁer:

With the ampliﬁer in standby, press  STANDBY/ON

while holding down OPTION+. When you see DB CLEAR?

appear in the display, press OPTION–, then OPTION+

again to conﬁrm. When you’ve reset the i.LINK database

memory, DB CLEAR SET shows in the display. If DB

ERROR is displayed, step through the procedure again.

Message Explanation

BUS FULL The i.LINK bus has reached its capacity and cannot transmit any more data.

CANNOT LINK 1 The connection between the ampliﬁer and the selected i.LINK-equipped component is unstable. If the

i.LINK cables appear to be connected properly and both the ampliﬁer and i.LINK-equipped component

are on, switch both units off, then on again to re-establish the connection between them.

CANNOT LINK 2 The ampliﬁer can’t identify the selected i.LINK-equipped component. For example, the ampliﬁer may not

be able to identify an i.LINK-equipped personal computer.

LINK CHECK The ampliﬁer is checking the i.LINK network. It does this when components are added to, or removed

from the network. The sound may be interrupted if this happens during playback.

LOOP CONNECT The i.LINK network cannot function because the connected components form a loop. See Creating an

i.LINK network on page 79 for more on this.

NO NAME When an i.LINK-equipped component has no name, this message is displayed instead of the proper

component name.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSA-AX10i-S Seite 98

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSA-AX10i-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info