Bedienungsanleitung Pioneer VSA-AX10i-S (Seite 99 von 104) (Englisch)

574062

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Additional information

USB interface

Miscellaneous

Note

• If the unit does not operate normally due to external

effects such as static electricity, disconnect the

power plug from the outlet and insert again to return

to normal operating conditions.

NO SIGNAL A component is outputting an i.LINK signal that the ampliﬁer cannot reproduce. This ampliﬁer can only

reproduce signals from i.LINK-Audio-equipped components. See About i.LINK on page 79 for more on

this.

PQLS OFF This is displayed when PQLS turns off during playback. The sound may be interrupted momentarily when

this happens.

PQLS ON This is displayed when PQLS turns on during playback. The sound may be interrupted momentarily when

this happens.

UNKNOWN When an i.LINK-equipped component name cannot be recognized, this message is displayed instead of

the proper component name.

Message Explanation

Symptom Cause Remedy

No sound. • The computer settings are incorrect. • Make sure you have set up your computer system to

output through the USB interface (see Using the USB

interface on page 80).

• The software or source material you are

using is not compatible with USB output.

• Update to a more recent version of your existing

software, try a different audio program, or try a different

source.

• The volume control on your computer is set

too low.

• Turn up the volume on your computer.

No sound from one or more

channels.

• The software settings are incorrect, or the

program you are using cannot output

multichannel audio.

• Try changing the software settings. If this doesn’t work,

update to a more recent version of your existing software,

or try a different audio program.

• The wrong input setting is selected for the

USB interface.

• Change the setting accordingly (see Selecting USB and

multichannel analog input channels on page 45).

Symptom Cause Remedy

The ampliﬁer doesn’t seem to

respond when the buttons are

pressed.

• Static electricity caused by dry air. • Switch the power off then on again. If this doesn’t seem

to work, try disconnecting the power plug from the outlet,

and insert again.

One of the Home THX 7.1

channel modes is selected, but

there are certain options that

can't be chosen.

• There is only one surround back speaker

connected or the current settings are for only

one surround back speaker.

• Make sure there are two surround back speakers

connected (see Connecting the speakers on page 24) and

make the necessary settings in Speaker Systems on

page 52.

There seems to be a time lag

between the speakers and the

output of the subwoofer.

• The subwoofer channel can be delayed

slightly if run through a low-pass ﬁlter.

• See Automatically setting up for surround sound on

page 35 to set up your system again using MCACC (this

will automatically compensate for a delay in the

subwoofer output).

The ampliﬁer doesn’t memorize

the last volume level you used

before switching it off.

• The ampliﬁer was switched off immediately

after changing the volume level.

• Make sure to switch off the ampliﬁer two seconds or

more after changing the volume.

The ampliﬁer doesn’t memorize

the last adjustments you made

before switching it off.

• The ampliﬁer was switched off immediately

after changing the ampliﬁer status.

• Make sure to switch off the ampliﬁer two seconds or

more after changing the ampliﬁer status.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSA-AX10i-S Seite 99

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSA-AX10i-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info