Bedienungsanleitung Pioneer VSX-1018AH-K (Seite 72 von 100) (Englisch)

455215

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Using other functions

Setting the Video options

There are a number of additional picture settings you can

make using the Video Parameter menu. The defaults, if

not stated, are listed in bold.

Important

• Note that if a setting doesn’t appear in the Video

Parameter menu, it is unavailable due to the current

source, setting and status of the receiver.

1 Press

RECEIVER

, then press

VIDEO PARAMETER

2Use

/

to select the setting you want to adjust.

Depending on the current status/mode of the receiver,

certain options may not be able to be selected. Check the

table below for notes on this.

3Use

/

to set it as necessary.

See the table below for the options available for each

setting.

4 Press

RETURN

to confirm and exit the menu.

DRC

(Dynamic

Range

Control)

Adjusts the level of dynamic

range for movie soundtracks

optimized for Dolby Digital, DTS,

Dolby Digital Plus, Dolby TrueHD,

DTS-HD and DTS-HD Master

Audio (you may need to use this

feature when listening to

surround sound at low volumes).

AUTO

OFF

MAX

MID

LFE ATT

(LFE

Attenuate)

Some Dolby Digital and DTS

audio sources include ultra-low

bass tones. Set the LFE attenuator

as necessary to prevent the ultra-

low bass tones from distorting the

sound from the speakers.

The LFE is not limited when set to

0 dB, which is the recommended

value. When set to –5 dB, –10 dB,

–15 dB or –20 dB, the LFE is

limited by the respective degree.

When OFF is selected, no sound

is output from the LFE channel.

0dB

–5dB/ –10dB/

–15dB/ –20dB/

OFF

SACD

GAIN

Brings out detail in SACDs by

maximizing the dynamic range

(during digital processing).

0 to 6 (dB)

Default: 0 (dB)

HDMI

(HDMI

Audio)

Specifies the routing of the HDMI

audio signal out of this receiver

(amp) or through to a TV or flat

panel TV. When THROUGH is

selected, no sound is output from

this receiver.

AMP

THROUGH

A. DELAY

(Auto

delay)

This feature automatically

corrects the audio-to-video delay

between components connected

with an HDMI cable. The audio

delay time is set depending on the

operational status of the display

connected with an HDMI cable.

The video delay time is

automatically adjusted according

to the audio delay time.

OFF

C. WIDTH

(Center

Width)

(Applicable

only when

using a

center

speaker)

Provides a better blend of the

front speakers by spreading the

center channel between the front

right and left speakers, making it

sound wider (higher settings) or

narrower (lower settings).

0 to 7

Default: 3

DIMENSION

Adjusts the depth of the surround

sound balance from front to back,

making the sound more distant

(minus settings), or more forward

(positive settings).

–3 to +3

Default: 0

PANORAMA

Extends the front stereo image to

include the surround speakers for

a ‘wraparound’ effect.

OFF

Setting What it does Option(s)

C. IMAGE

(Center

Image)

(Applicable

only when

using a

center

speaker)

Adjusts the center image to

create a wider stereo effect with

vocals. Adjust the effect from 0

(all center channel sent to front

right and left speakers) to 10

(center channel sent to the center

speaker only).

0 to 10

Default: 3

(Neo:6 Music),

10 (Neo:6

Cinema)

EFFECT Sets the effect level for the

currently selected Advanced

Surround mode (each mode can

be set separately).

10 to 90

a.When MCACC OFF is selected, all MCACC preset memories become

deactivated.

b.When EQ OFF is selected, the MCACC indicator does not light even when

a MCACC preset memory is selected.

c.The initially set AUTO is only available for Dolby TrueHD signals. Select

MAX or MID for signals other than Dolby TrueHD.

d.You shouldn’t have any problems using this with most SACD discs, but

if the sound distorts, it is best to switch the gain setting back to 0 dB.

e.HDMI Audio setting cannot be switched while performing synchronized

amp mode operations.

f. This feature is only available when the connected display supports the

automatic audio/video synchronizing capability (‘lip-sync’) for HDMI. If you

find the automatically set delay time unsuitable, set A. DELAY to OFF and

adjust the delay time manually. For more details about the lip-sync feature

of your display, contact the manufacturer directly.

g.Only when listening to 2-channel sources in Dolby Pro Logic IIx Music/

Dolby Pro Logic II Music mode.

h.Only when listening to 2-channel sources in Neo:6 Cinema and Neo:6

Music mode.

Note

1 Brightness, Contrast, Hue, Chroma, Resolution and Aspect can be set for each input source.

Setting What it does Option(s)

VSX-1018AH_KU.book Page 72 Monday, March 10, 2008 4:51 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-1018AH-K Seite 72

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-1018AH-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info