Bedienungsanleitung Pioneer VSX-1018AH-K (Seite 73 von 100) (Englisch)

455215

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Using other functions

Making an audio or a video recording

You can make an audio or a video recording from the

built-in tuner, or from an audio or video source

connected to the receiver (such as a CD player or TV).

Keep in mind you can’t make a digital recording from an

analog source or vice-versa, so make sure the

components you are recording to/from are hooked up in

the same way (see Connecting your equipment on

page 13 for more on connections).

Since the video converter is not available when making

recordings (from the video OUT jacks) make sure to use

the same type of video cable for connecting your recorder

as you used to connect your video source (the one you

want to record) to this receiver. For example, you must

connect your recorder using component if your source

has also been connected using component.

For more information about video connections, see

Connecting a DVD/HDD recorder, VCR and other video

sources on page 18.

1 Select the source you want to record.

Use the input source buttons (or INPUT SELECT).

• If necessary, press SIGNAL SEL to select the input

signal corresponding to the source component (see

Choosing the input signal on page 33 for more on

this).

2 Prepare the source you want to record.

Tune to the radio station, load the CD, video, DVD, etc.

3 Prepare the recorder.

Insert a blank tape, MD, video, etc. into the recording

device and set the recording levels.

Refer to the instructions that came with the recorder if

you are unsure how to do this. Most video recorders set

the audio recording level automatically—check the

component’s instruction manual if you’re unsure.

4 Start recording, then start playback of the source

component.

Setting What it does Option(s)

V. CONV

(Digital

Video

Conversion)

Converts video signals for output

from the MONITOR OUT jacks for

all video types.

OFF

BRIGHT

(Brightness)

Adjusts the overall brightness. –10 to +10

Default: 0

CONTRAST Adjusts the contrast between

light and dark.

–10 to +10

Default: 0

HUE Adjusts the red/green balance. –10 to +10

Default: 0

CHROMA Adjusts saturation from dull to

bright.

–10 to +10

Default: 0

RES

(Resolution)

a.When a resolution value is selected in this setting and the analog signals

input are converted and output as HDMI signals, images may not appear

depending on the video signals being input or the resolution of your

monitor. Also, depending on the source component or the monitor being

used, the output resolution may be different from this setting. Conversion

to 1080p is available only for the input signals of 480i/576i/480p/576p.

Specifies the output resolution of

the video signal (when analog

video input signals are output at

the HDMI OUT connector, select

this according to the resolution of

your monitor and the images you

wish to watch). When AUTO is

selected, the resolution is

automatically selected depending

on the capability of the display

connected to this receiver. When

PURE is selected, the signals are

output with the same resolution

as when input.

AUTO

PURE

480p/576p

720p

1080i

1080p

ASP

(Aspect)

b.If the image doesn’t match your monitor type, adjust the aspect ratio on

the source component or on the monitor.

Specifies the aspect ratio when

analog video input signals are

output at the HDMI output. Make

your desired settings while

checking each setting on your

display.

THROUGH

NORMAL

ZOOM

Note

1 • The receiver’s volume, Audio parameters (the bass/treble controls, for example), and surround effects have no effect on the recorded signal.

• Some digital sources are copy-protected, and can only be recorded in analog.

• Some video sources are copy-protected. These cannot be recorded.

DVD BD TV HDMI

DVR 1 DVR 2 CD

XM SIRIUS

CD-R

DIMMER

FM/AM

123

SLEEPMCACC

INPUT

SELECT

GENRE

456

iPod USB

DVD BD TV HDMI

DVR 1 DVR 2 CD

XM SIRIUS

CD-R

FM/AM

INPUT

SELECT

iPod USB

AUTO/

DIRECT

THX STATUS PHASE

TV CTRL

HDD

STEREO/

A.L.C.

DVD

STANDARD

ADV SURR

ANT

AUDIO

DISPLAY

MPX

SIGNAL SEL

RECEIVER

MEM

SIGNAL SEL

VSX-1018AH_KU.book Page 73 Monday, March 10, 2008 4:51 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-1018AH-K Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-1018AH-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info