Bedienungsanleitung Pioneer VSX-1019AH-K (Seite 37 von 128) (Englisch)

455217

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

Basic Setup 04

Automatically setting up for

surround sound (Auto MCACC)

The Auto MCACC Setup measures the

acoustic characteristics of your listening area,

taking into account ambient noise, speaker

connection and speaker size, and tests for both

channel delay and channel level. After you

have set up the microphone provided with your

system, the receiver uses the information from

a series of test tones to optimize the speaker

settings and equalization for your particular

room.

Make sure you do this before moving on to

Playing a source on page 41.

Important

•Make sure the microphone and speakers

are not moved during the Auto MCACC

Setup.

• Using the Auto MCACC Setup w

ill

overwrite

any existing settings for the

MCACC preset you select.

•Before using the Auto MCACC Setup, the

headphones should be disconnected and

the iPod/USB or SIRIUS Radio function

should not be selected as an input

function.

CAUTION

• The test tones used in the Auto MCACC

Setup are output at high volume.

1 Switch on the receiver and your TV.

2 Connect the microphone to the

MCACC

SETUP MIC

jack on the front panel.

• Push down on the PUSH OPEN tab to

access the MCACC SETUP MIC jack.

Place the microphone so that it’s about ear level

at your normal listening position (use a tripod if

possible). Make sure there are no obstacles

between the speakers and the microphone.

The Full Auto MCACC display appears once the

microphone is connected.

3 Select

Surr Back System

setting,

select

an MCACC preset

, press and then

select START.

Note

1 • You can’t use the HOME MENU when the iPod/USB or SIRIUS Radio input function is selected (in either the main

or sub zone). When you set ZONE 2 to ON (page 69), you can’t use the HOME MENU.

• If you leave the GUI screen for over five minutes, the screen saver will appear.

2• If you are planning on bi-amping your front speakers, or setting up a separate speaker system in another room, read

through Surround back speaker setting on page 94 and make sure to connect your speakers as necessary before

continuing to step 4.

• If you have THX-certified speakers, select Return, then select Auto MCACC for

the THX Speaker setting. See

Automa

tic MCACC (Expert) on page 78 for more on this.

3 The six MCACC presets are used for storing surround sound settings for different listening positions. Simply choose

an unused preset for now (you can rename it later in Data Management on page 91).

4Note that correction curves are saved only when set to SYMMETRY. Select Return, then select Auto MCACC to save

other correction curves (such as ALL CH ADJ and FRONT ALIGN). See Automatic MCACC (Expert) on page 78 for

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-1019AH-K Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-1019AH-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info