Bedienungsanleitung Pioneer VSX-1021K (Seite 14 von 156) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

455184

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

02 Connecting your equipment

MULTI-ZONE setup

This receiver can power up to two independent

systems in separate rooms after you have made

the proper MULTI-ZONE connections.

Different sources can be playing in two zones at

the same time or, depending on your needs, the

same source can also be used. The main and

sub zone have independent power (the main

zone power can be off while sub zone is on) and

the sub zone can be controlled by the remote or

front panel controls.

Important

VSX-921 model cannot connect the TV monitor

for sub zone.

Making MULTI-ZONE connections

It is possible to make these connections if you

have a separate TV and speakers for the sub

zone (ZONE 2). You will also need a separate

amplifier if you are not using the MULTI-ZONE

setup using speaker terminals (ZONE 2) on page

14 for the sub zone.

MULTI-ZONE listening options

The following table shows the signals that can

be output to ZONE 2:

In case of VSX-1021

Sub Zone Input functions available

ZONE 2

DVD, TV/SAT, DVR/BDR, VIDEO,

HOME MEDIA GALLERY, iPod/USB,

CD, CD-R/TAPE, TUNER, ADAPTER

PORT

(Outputs analog audio, composite

video.)

It is not possible to down-convert the audio

and video input signals from the HDMI input

terminals, digital input terminals (OPTICAL and

COAXIAL) and the COMPONENT VIDEO input

terminals and output them to ZONE 2.

In case of VSX-921

Sub Zone Input functions available

ZONE 2

DVD, TV/SAT, DVR/BDR, VIDEO 1,

VIDEO 2, CD, CD-R/TAPE, TUNER,

ADAPTER PORT

(Output analog audio only.)

It is not possible to down-convert the audio

input signal from the HDMI input terminals or

digital input terminals (OPTICAL and COAXIAL)

and output them to ZONE 2.

Basic MULTI-ZONE setup (ZONE 2)

1 Connect a separate amplifier to the

AUDIO ZONE 2 OUT jacks on this receiver.

You should have a pair of speakers attached to

the sub zone amplifier as shown in the follow-

ing illustration.

2 VSX-1021 only: Connect a TV monitor

to the VIDEO ZONE 2 OUT jack on this

receiver.

HDMI

VIDEO

CONTROL

COMPONENT

VIDEO

VIDEO IN

TV/SAT

ZONE 2

DVR/BDR

CD-R/TAPE

ZONE 2

DVR/

BDR

OUT

DVD ININ

OUT OUT

VIDEO

DVD INBD IN

DVR/BDR I

TV/SAT VIDEO DVDY P

AUDIO

ASSIGN

ABLE

MONITOR

OUT

MONITOR

OUT

(

DVD

)

(

DVR/

BDR

)

ASSIGNABLE

OUT

R L

AUDIO IN

VIDEO IN

Sub zone (ZONE 2)

Main zone

VSX-1021

only

MULTI-ZONE setup using speaker

terminals (ZONE 2)

You must select ZONE 2 in Speaker system

setting on Operating Instructions in CD-ROM to

use this setup.

Connecting AM/FM antennas

Connect the AM loop antenna and the FM wire

antenna as shown below. To improve reception

and sound quality, connect external antennas

(see Connecting external antennas on page 14 ).

FM UNBAL

AM LOOP

ANTENNA

fig. a fig. b fig. c

1 Pull off the protective shields of both

AM antenna wires.

2 Push open the tabs, then insert one

wire fully into each terminal, then release

the tabs to secure the AM antenna wires.

3 Fix the AM loop antenna to the

attached stand.

To fix the stand to the antenna, bend in the

direction indicated by the arrow (fig. a) then clip

the loop onto the stand (fig. b).

! If you plan to mount the AM antenna to a

wall or other surface, secure the stand with

screws (fig. c) before clipping the loop to the

stand. Make sure the reception is clear.

4 Place the AM antenna on a flat

surface and in a direction giving the best

reception.

5 Connect the FM wire antenna into the

FM antenna socket.

For best results, extend the FM antenna fully

and fix to a wall or door frame. Don’t drape

loosely or leave coiled up.

Connecting external antennas

To improve FM reception, connect an external

FM antenna to FM UNBAL 75 W.

FM UNBAL

AM LOOP

ANTENNA

75 Ω coaxial cable

To improve AM reception, connect a 5 m to 6

m length of vinyl-coated wire to the AM LOOP

terminals without disconnecting the supplied

AM loop antenna.

For the best possible reception, suspend hori-

zontally outdoors.

FM UNBAL

AM LOOP

ANTENNA

Outdoor antenna

Indoor antenna

(vinyl-coated wire)

5 m to 6 m

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-1021K Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-1021K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info