Bedienungsanleitung Pioneer VSX-1123-K (Seite 89 von 113) (Englisch)

574087

Zoom out

Zoom in

Vorherige Seite

1/113

Nächste Seite

The System Setup and Other Setup menus

3 Select the Volume Level setting you want.

When making multi-zone connections using the AUDIO ZONE 2 OUT terminals and performing playback in Zone

2, you can set whether to adjust the Zone 2 volume on the receiver or to fix it to a specific volume (–40 dB Fixed

or 0 dB Fixed). This is set to Variable upon shipment from the factory, allowing the volume to be adjusted on the

receiver. If you would like to adjust the volume from the connected amplifier, make the setting below.

For ZONE 2, this setting is not possible if multi-zone settings have been made using the speaker terminals and

Speaker System is set to ZONE 2. In this case, adjust the volume for the sub zones on the receiver.

! Variable (default) – The Zone 2 volume is adjusted from the receiver.

! –40 dB Fixed/0 dB Fixed – The Zone 2 volume level output from the receiver is fixed to the value set here.

4 Press RETURN.

5 Select ‘MAIN/HDZONE’, then press ENTER.

6 Set the usage of the HDMI OUT 2 terminal.

! MAIN: Select this to output the same input source as in the main zone.

! HDZONE: Use the HDMI output’s multizone function (HDZONE) to output an input source different from the

one in the main zone (page 67).

7 When you’re finished, press RETURN.

You will return to the Other Setup menu.

On Screen Display Setup

When the receiver is operated, its status (the input name, listening mode, etc.) is displayed superimposed over

the video output on the display. This status display can be turned off by switching this setting to OFF.

! Default setting: ON

1 Select ‘On Screen Display Setup’ from the Other Setup menu.

2 Select the On Screen Display setting you want.

3 When you’re finished, press RETURN.

You will return to the Other Setup menu.

Notes

! The on-screen display is not displayed for video outputs from the HDMI OUT 2 and VIDEO MONITOR OUT

terminals.

! The size of the characters displayed differs according to the output resolution.

Play ZONE Setup

Select the zone for playing the audio contents of devices in the home network when using in the DMR mode.

! For playable DLNA-compatible network devices, see page 53.

1 Select ‘Play ZONE Setup’ from the Other Setup menu.

2 Select the zone in which you want to play the audio contents.

3 When you’re finished, press RETURN.

You will return to the Other Setup menu.

Making network settings using Safari

1 Launch Safari on your computer.

2 Press Bookmark icon. Click Bonjour list (a), and then select this receiver's name

(Friendly Name) (b) in Bookmark.

If Bonjour list is not displayed, access the IP address“http://(the receiver's IP address)” from Safari.

3 Click IP, Proxy Setting.

4 Setup the network settings manually and then press Apply.

Note

This setting for the network has been confirmed for Mac OS X 10.7 and Safari 5.1.

Using Safari to set a friendly name

1 Launch Safari on your computer.

2 Press Bookmark icon. Click Bonjour list (a), and then select this receiver's name

(Friendly Name) (b) in Bookmark.

If Bonjour list is not displayed, access the IP address“http://(the receiver's IP address)” from Safari.

3 Click Friendly Name.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-1123-K Seite 89

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-1123-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info