Bedienungsanleitung Pioneer VSX-31 (Seite 75 von 136) (Englisch)

574063

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Using other functions 08

Setting the Video options

There are a number of additional picture

settings you can make using the VIDEO

PARAMETER menu. The defaults, if not stated,

are listed in bold.

Important

• Note that if an option cannot be selected

on the VIDEO PARAMETER menu, it is

unavailable due to the current source,

setting and status of the receiver.

1 Press , then press

VIDEO

PARAMETER

2Use

/

to select the setting you want to

adjust.

Depending on the current status/mode of the

receiver, certain options may not be able to be

selected. Check the table below for notes on

this.

3Use

/

to set as necessary.

See the table below for the options available for

each setting.

4Press

RETURN

to confirm and exit the

menu.

i. This feature is only available when the connected display supports the automatic audio/video synchronizing capability

(‘lipsync’) for HDMI. If you find the automatically set delay time unsuitable, set A. DELAY to OFF and adjust the delay

time manually. For more details about the lipsync feature of your display, contact the manufacturer directly.

j. Only when listening to 2-channel sources in Dolby Pro Logic IIx Music/Dolby Pro Logic II Music mode.

k.Only when listening to 2-channel sources in Neo:6 MUSIC/CINEMA mode.

l. • You can’t use the Virtual Surround Back mode when the headphones are connected to this receiver or when any of

the stereo, Front Stage Surround Advance or Stream Direct modes is selected.

• You can only use the Virtual Surround Back mode if the surround speakers are on and the SB setting is set to NO

or if Front Bi-Amp or ZONE 2 is selected at Speaker System.

• The Virtual Surround Back mode cannot be applied to sources that do not have surround channel information (only

when listening in some formats of Dolby TrueHD, DTS-HD or DTS Express mode).

m.• You can’t use the Virtual Front Height mode when the headphones are connected to this receiver or when any of

the stereo, Front Stage Surround Advance or Stream Direct modes is selected.

• You can only use the Virtual Front Height mode if the surround speakers are on.

• The Virtual Front Height mode cannot be applied to sources that do not have surround channel information (only

when listening in some formats of Dolby TrueHD, DTS-HD or DTS Express mode).

Note

1 • All of the setting items can be set for each input function.

• Setting items other than V. CONV can only be selected when V. CONV is set to ON.

RECEIVER

Setting What it does Option(s)

V. CONV

(Digital Video Conversion)

Converts video signals for output from the MONITOR OUT jacks

(including HDMI OUT connector) for all video types (see page 24).

OFF

RES

(Resolution)

Specifies the output resolution of the video signal (when video

input signals are output at the HDMI OUT connector, select this

according to the resolution of your monitor and the images you

wish to watch).

AUTO

PURE

480p/576p

720p

1080i

1080p

VSX-31_30_UC.book 75 ページ２０１０年８月２５日　水曜日　午前９時２８分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-31 Seite 75

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info