Bedienungsanleitung Pioneer VSX-321-K-P (Seite 17 von 64) (Englisch)

574065

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Basic playback

English

Français

Español

Chapter 3:

Basic playback

Canceling the demo display

The display on the front panel shows various information

(demo displays) when the receiver is not operating.

You can turn off the demo display. For details, see The FL

Demo Mode menu on page 26.

Playing a source

Here are the basic instructions for playing a source (such as

a DVD disc) with your home theater system.

1 Switch on your system components and receiver.

Start by switching on the playback component (for example a

DVD player), your TV, then the receiver (press  RECEIVER).

2 Switch the TV input to the input that connects this

receiver.

For example, if you connected this receiver to the VIDEO

jacks on your TV, make sure that the VIDEO input is now

selected.

3 Press input function buttons to select the input function

you want to play.

• The input of the receiver will switch over, and you will be

able to operate other components using the remote

control. To operate the receiver, first press on

the remote control, then press the appropriate button to

operate.

• The input source can also be selected by using INPUT

SELECT buttons on the remote control, or by

using the front panel INPUT SELECTOR dial. In this case,

the remote control won’t switch operational modes.

If you selected the proper input source and there is still no

sound, select the audio input signal for playback (see

Selecting the audio input signal below).

4 Press AUTO/DIRECT to select ‘AUTO SURROUND’ and

start playback of the source.

If you’re playing a Dolby Digital or DTS surround sound DVD

disc, with a digital audio connection, you should hear

surround sound. If you’re playing a stereo source or if the

connection is an analog audio connection, you will only hear

sound from the front left/right speakers in the default

listening mode.

It is possible to check on the front panel display whether or

not surround sound playback is being performed properly.

When using a surround back speaker, 2D+PLIIx is

displayed when playing Dolby Digital 5.1-channel signals,

and DTS+NEO:6 is displayed when playing DTS 5.1-channel

signals.

When not using a surround back speaker, 2D is displayed

when playing Dolby Digital signals.

If the display does not correspond to the input signal and

listening mode, check the connections and settings.

Note

• You may need to check the digital audio output settings

on your DVD player or digital satellite receiver. It should

be set to output Dolby Digital, DTS and 88.2 kHz/96 kHz

PCM (2 channel) audio, and if there is an MPEG audio

option, set this to convert the MPEG audio to PCM.

• Depending on your DVD player or source discs, you may

only get digital 2 channel stereo and analog sound. In this

case, the receiver must be set to a multichannel listening

mode if you want multichannel surround sound.

5 Use MASTER VOLUME to adjust the volume level.

Turn down the volume of your TV so that all sound is coming

from the speakers connected to this receiver.

Selecting the audio input signal

The audio input signal can be selected for each input source.

Once it is set, the audio input that was selected will be

applied whenever you select the input source using the input

function buttons.



Press SIGNAL SEL to select the audio input signal

corresponding to the source component.

Each press cycles through the following:

• H – Selects an HDMI signal. H can be selected for BD,

DVD, DVR/BDR and CD/SAT input. For other inputs, H

cannot be selected.

When the HDMI option in Setting the Audio options on

page 23 is set to THRU, the sound will be heard through

your TV, not from this receiver.

• C1/O1 – Selects the digital input. The coaxial 1 input is

selected for C1, and the optical 1 audio input is selected

for O1.

• A – Selects the analog inputs.

When H (HDMI) or C1/O1 (digital) is selected and the

selected audio input is not provided, A (analog) is

automatically selected.

Except BD, DVR/BDR input.

Note

•For the TV input, only A (analog) or C1/O1 (digital) can be

selected. However, if the ARC at HDMI SET is set to ON,

the input is fixed to H (HDMI) and cannot be changed.

•When set to H (HDMI) or C1/O1 (digital), 2 lights when

a Dolby Digital signal is input, and DTS lights when a DTS

signal is input.

•When the H (HDMI) is selected, the A and DIGITAL

indicators are off (see page 7).

INPUT SELECT

SOURCESLEEP

CONTROL

INPUT

RECEIVER

BD DVD TV

DVR/BDR

CD-R

ADAPTER

TUNER

PORTABLE

DTV/TV

ENTER

ADV SURR

AUTO/

DIRECT

MUTE

RETURN

AUDIO

PARAMETER

TUNER EDIT

TOOLS

MASTER

VOLUME

BAND

TOP

BD MENU

HOME

SETUP

PTY SEARCH

ALC/

STANDARD

STEREO

RECEIVER

VOL

DVR/BDR

CD-R

ADAPTER

TUNER

PORTABLE

PHASE

SIGNAL SELS.RETRIEVER

03_basic_playback.fm 17 ページ２０１１年７月２２日　金曜日　午後６時６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-321-K-P Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-321-K-P

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info