Bedienungsanleitung Pioneer VSX-321-K-P (Seite 19 von 64) (Englisch)

574065

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Basic playback

English

Français

Español

Saving station presets

If you often listen to a particular radio station, it’s convenient

to have the receiver store the frequency for easy recall

whenever you want to listen to that station. This saves the

effort of manually tuning in each time. This unit can

memorize up to 30 stations.

1 Tune to a station you want to memorize.

See Listening to the radio on page 18 for more on this.

2 Press TUNER EDIT.

The display shows PRESET, then a blinking MEM and station

preset.

3 Press PRESET

/

to select the station preset you

want.

You can also use the number buttons.

4 Press ENTER.

The preset number stop blinking and the receiver stores the

station.

Note

• If the receiver is left disconnected from the AC power

outlet for over a month, the station memories will be lost

and will have to be reprogrammed.

• Stations are stored in stereo. When the station is stored

in the FM MONO mode, it shows as ST when recalled.

Listening to station presets

You will need to have some presets stored to do this. See

Saving station presets above if you haven’t done this already.



Press PRESET

/

to select the station preset you

want.

• You can also use the number buttons on the remote

control to recall the station preset.

Naming preset stations

For easier identification, you can name all of your preset

stations.

1 Choose the station preset you want to name.

See Listening to station presets above for how to do this.

2 Press TUNER EDIT twice.

The cursor at the first character position is blinking on the

display.

3 Input the name you want.

Choose a name up to eight characters long.

•Use PRESET / to select character position.

•Use TUNE / to select characters.

• The name is stored when ENTER is pressed.

Tip

• To erase a station name, follow steps 1 and 2, and press

ENTER while the display is blank. Press TUNER EDIT

while the display is blank, to keep the previous name.

• Once you have named a station preset, Press DISP to

show the name. When you want to return to the frequency

display, press DISP several times to show the frequency.

Changing the radio frequency step

If you find that you can’t tune into stations successfully, the

frequency step may not be suitable for your country/region.

Here’s how to switch the setting:

1 Switch the receiver into standby.

While holding down the TUNE  button, press and

hold the  STANDBY/ON button for about two seconds.

• The channel tuning step alternates between 10K STEP

and

9K STEP each time you do this.

INPUT SELECT

SOURCESLEEP

CONTROL

INPUT

RECEIVER

VOL

RECEIVER

BD DVD TV

DVR/BDR

CD-R

ADAPTER

TUNER

PORTABLE

PHASE

SIGNAL SELS.RETRIEVER

DTV/TV

ENTER

DISP

MUTE

RETURN

AUDIO

PARAMETER

TUNER EDIT

TOOLS

MASTER

VOLUME

BAND

TRE

BASS

TOP

HDD DVD VCR

HOME

SETUP

PTY SEARCH

03_basic_playback.fm 19 ページ２０１１年７月２２日　金曜日　午後６時６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-321-K-P Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-321-K-P

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info