Bedienungsanleitung Pioneer VSX-531D (Seite 22 von 41) (Englisch)

699667

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

Basic playback

In the following locations, poor condition or inability to receive

radio waves may cause the audio to be interrupted or

stopped:

•

In reinforced concrete buildings or steel framed or iron-

framed buildings.

•

Near large metallic furniture.

•

In a crowd of people or near a building or obstacle.

•

In a location exposed to the magnetic field, static electricity

or radio wave interference from radio communication

equipment using the same frequency band (2.4 GHz) as

this unit, such as a 2.4 GHz wireless LAN device

(IEEE802.11b/g) or microwave oven.

•

If you live in a heavily populated residential area

(apartment, townhouse, etc.) and if your neighbor’s

microwave is placed near your system, you may

experience radio wave interference. If this occurs, move

your unit to a different place. When the microwave is not

in use, there will be no radio wave interference.

Radio wave reflections

The radio waves received by this unit include the radio wave

coming directly from the device equipped with BLUETOOTH

wireless technology (direct wave) and waves coming from

various directions due to reflections by walls, furniture and

building (reflected waves). The reflected waves (due to

obstacles and reflecting objects) further produce a variety of

reflected waves as well as variation in reception condition

depending on locations. If the audio cannot be received

properly due to this phenomenon, try moving the location of

the device equipped with BLUETOOTH wireless technology

a little. Also note that audio may be interrupted due to the

reflected waves when a person crosses or approaches the

space between this unit and the device equipped with

BLUETOOTH wireless technology.

Precautions regarding connections to products

supported by this unit

•

Complete connections for all devices supported by this

unit, including all audio cords and power cables before

connecting them to this unit.

•

After completing connections to this unit, check the audio

and power cables to confirm that they not twisted together.

•

When disconnecting this unit, confirm that you have

sufficient working space in the surrounding area.

When changing connections of audio or other cables for

products supported by this unit, confirm that you have

sufficient working space in the surrounding area.

Listening to FM Radio

The following steps show you how to tune in to FM radio

broadcasts using the automatic (search) and manual (step)

tuning functions. Once you are tuned to a station you can

memorize the frequency for recall later—see Saving station

presets below for more on how to do this.

Press

TUN

then press

BAND

to select the FM band.

Tune to a station.

There are three ways to do this:

Automatic tuning

To search for stations, press and hold

TUNE +/–

for

about a second. The receiver will start searching for the

next station, stopping when it has found one. Repeat to

search for other stations.

Manual tuning

To change the frequency one step at a time, press

TUNE +/–

High speed tuning

Press and hold

TUNE +/–

for high speed tuning.

Improving FM sound

If the TUNE or ST indicators don’t light when tuning to an FM

station because the signal is weak, set the receiver to the

mono reception mode.

…

Press

BAND

to select FM MONO.

This should improve the sound quality and allow you to

enjoy the broadcast.

Saving station presets

If you often listen to a particular radio station, it’s convenient

to have the receiver store the frequency for easy recall

whenever you want to listen to that station. This saves the

effort of manually tuning in each time. This unit can

memorize up to 30 stations.

Tune to a station you want to memorize.

See Listening to FM Radio above for more on this.

Press

EDIT

The display shows PRESET, then a blinking MEM and

station preset.

Press

PRESET +/–

to select the station preset you

want.

Press

ENTER

The preset number stop blinking and the receiver stores

the station.

Note

•

If the receiver is left disconnected from the AC power

outlet for over a month, the station memories will be lost

and will have to be reprogrammed.

•

Stations are stored in stereo. When the station is stored in

the FM MONO mode, it shows as ST when recalled.

Listening to station presets

You will need to have some presets stored to do this. See

Saving station presets

on page 22 if you haven’t done this

already.

PHASE

S.RETRIEVER

BT AUDIO

BT AUDIOBT AUDIO

BT AUDIO

TRE

BASS

CBLCBLBDBD

BOXS.BOX

GAME

USB

TUN

AUX

DISP

TUNER

EDIT

SLEEP

TUNE

STATUS

PRESET

BAND

PHASEPHASE

S.RETRIEVERS.RETRIEVER

BT AUDIOBT AUDIOBT AUDIOBT AUDIO

TRETRE

BASSBASS

CBLCBLBDBD

S.BOXS.BOX

CDCD

GAMEGAME

TVTV

USBUSBTUNTUN

AUXAUX

BTBT

DISP

TUNER

EDIT

SLEEP

TUNE

STATUS

PRESET

BAND

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-531D Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-531D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info