699667
24
Zoom out
Zoom in
Vorherige Seite
1/41
Nächste Seite
Basic playback
4
4
24
2
35
4
Displaying RDS information
Use the
DISP
button to display the different types of RDS
information available.
Press
DISP
for RDS information.
Each press changes the display as follows:
Listening mode
Master volume
Radio Text (RT) Messages sent by the radio station.
For example, a talk radio station may provide a phone
number as RT.
Program Service Name (PS) – The name of the radio
station.
Program Type (PTY) – This indicates the kind of
program currently being broadcast.
Current tuner frequency (FREQ)
Note
If any noise is picked up while displaying the RT scroll,
some characters may be displayed incorrectly.
If you see NO TEXT in the RT display, it means no RT data
is sent from the broadcast station. The display will
automatically switch to the PS data display (if no PS data,
NO NAME is displayed).
In the PTY display, NO PTY may be shown.
Special characters not supported by the unit may appear
as spaces.
Listening to DAB Digital Radio
1
Press
TUN
then press
BAND
to select DAB.
The very first time you select DAB, the Auto Tuning
function automatically scans the DAB Band 3 for the
multiplexes (i.e., stations) available in your area.
Once the scanning process is complete, the first
station that was detected is selected.
If a new DAB station is introduced, or you move to a
new area, press
HOME MENU
button on the remote
controller, then in the Home Menu displayed set "DAB
Setup"– "DAB SCAN". See DAB Scan
on page 34.
2
Select the desired radio station with
TUNE +/–
.
Changing the order stations are displayed
You can sort the available stations alphabetically or by
multiplex.
Press
PTY
repeatedly to set the method for sorting the
display order from the following.
Alphabet (default setting): Sort stations
alphabetically.
Multiplex : Sort stations by multiplex.
Displaying DAB Radio Information
Press
DISP
repeatedly to display more information
about the selected DAB station.
DLS (Dynamic Label Segment): When tuned to a
station that's broadcasting DLS text data, the text will
scroll across the display.
Program Type: Displays the type of program.
Bit Rate and Audio Mode: Displays the station's bit
rate and audio mode (Stereo, Mono).
Quality: Displays the signal quality.
0 - 59: Poor reception
60 - 79: Good reception
80 - 100: Excellent reception
Multiplex Name: Displays the name of the current
multiplex.
Multiplex Number and Frequency: Displays the
number and frequency of the current multiplex.
24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Pioneer VSX-531D wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Pioneer VSX-531D

Pioneer VSX-531D Bedienungsanleitung - Deutsch - 41 seiten

Pioneer VSX-531D Bedienungsanleitung - Holländisch - 41 seiten

Pioneer VSX-531D Bedienungsanleitung - Französisch - 41 seiten

Pioneer VSX-531D Bedienungsanleitung - Italienisch - 41 seiten

Pioneer VSX-531D Bedienungsanleitung - Spanisch - 41 seiten

Pioneer VSX-531D Bedienungsanleitung - Finnisch - 41 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info