699667
25
Zoom out
Zoom in
Vorherige Seite
1/41
Nächste Seite
25
2
2
2
8
35
4
Connecting your equipment
Placing the speakers
By connecting the left and right front speakers (L/R), the center speaker (C), the left and right
surround speakers (SL/SR), and the subwoofer (SW), a 5.1 ch surround system can be
enjoyed.
To achieve the best possible surround sound, install your speakers as shown below.
Hints on the speaker placement
Where you put your speakers in the room has a big effect on the quality of the sound. The
following guidelines should help you to get the best sound from your system.
The subwoofer can be placed on the floor. Ideally, the other speakers should be at about
ear-level when you’re listening to them. Putting the speakers on the floor (except the
subwoofer), or mounting them very high on a wall is not recommended.
For the best stereo effect, place the front speakers 2 m to 3 m apart, at equal distance from
the TV.
If you’re going to place speakers around your CRT TV, use shielded speakers or place the
speakers at a sufficient distance from your CRT TV.
If you’re using a center speaker, place the front speakers at a wider angle. If not, place
them at a narrower angle.
Place the center speaker above or below the TV so that the sound of the center channel is
localized at the TV screen. Also, make sure the center speaker does not cross the line
formed by the leading edge of the front left and right speakers.
It is best to angle the speakers towards the listening position. The angle depends on the
size of the room. Use less of an angle for bigger rooms.
The optimal positioning for surround speakers is just above ear height. Make sure the
speakers don’t face each other. For DVD-Audio, the speakers should be more directly
behind the listener than for home theater playback.
Try not to place the surround speakers farther away from the listening position than the
front and center speakers. Doing so can weaken the surround sound effect.
CAUTION
Make sure that all speakers are securely installed. This not only improves sound quality,
but also reduces the risk of damage or injury resulting from speakers being knocked over
or falling in the event of external shocks such as earthquakes.
120
120
SL
L
SW
C
R
SR
5.1 channel surround system:
2
2
2
8
35
4
Connecting your equipment
Placing the speakers
By connecting the left and right front speakers (L/R), the center speaker (C), the left and right
surround speakers (SL/SR), and the subwoofer (SW), a 5.1 ch surround system can be
enjoyed.
To achieve the best possible surround sound, install your speakers as shown below.
Hints on the speaker placement
Where you put your speakers in the room has a big effect on the quality of the sound. The
following guidelines should help you to get the best sound from your system.
The subwoofer can be placed on the floor. Ideally, the other speakers should be at about
ear-level when you’re listening to them. Putting the speakers on the floor (except the
subwoofer), or mounting them very high on a wall is not recommended.
For the best stereo effect, place the front speakers 2 m to 3 m apart, at equal distance from
the TV.
If you’re going to place speakers around your CRT TV, use shielded speakers or place the
speakers at a sufficient distance from your CRT TV.
If you’re using a center speaker, place the front speakers at a wider angle. If not, place
them at a narrower angle.
Place the center speaker above or below the TV so that the sound of the center channel is
localized at the TV screen. Also, make sure the center speaker does not cross the line
formed by the leading edge of the front left and right speakers.
It is best to angle the speakers towards the listening position. The angle depends on the
size of the room. Use less of an angle for bigger rooms.
The optimal positioning for surround speakers is just above ear height. Make sure the
speakers don’t face each other. For DVD-Audio, the speakers should be more directly
behind the listener than for home theater playback.
Try not to place the surround speakers farther away from the listening position than the
front and center speakers. Doing so can weaken the surround sound effect.
CAUTION
Make sure that all speakers are securely installed. This not only improves sound quality,
but also reduces the risk of damage or injury resulting from speakers being knocked over
or falling in the event of external shocks such as earthquakes.
120
120
SL
L
SW
C
R
SR
5.1 channel surround system:
2
2
2
8
35
4
Connecting your equipment
Placing the speakers
By connecting the left and right front speakers (L/R), the center speaker (C), the left and right
surround speakers (SL/SR), and the subwoofer (SW), a 5.1 ch surround system can be
enjoyed.
To achieve the best possible surround sound, install your speakers as shown below.
Hints on the speaker placement
Where you put your speakers in the room has a big effect on the quality of the sound. The
following guidelines should help you to get the best sound from your system.
The subwoofer can be placed on the floor. Ideally, the other speakers should be at about
ear-level when you’re listening to them. Putting the speakers on the floor (except the
subwoofer), or mounting them very high on a wall is not recommended.
For the best stereo effect, place the front speakers 2 m to 3 m apart, at equal distance from
the TV.
If you’re going to place speakers around your CRT TV, use shielded speakers or place the
speakers at a sufficient distance from your CRT TV.
If you’re using a center speaker, place the front speakers at a wider angle. If not, place
them at a narrower angle.
Place the center speaker above or below the TV so that the sound of the center channel is
localized at the TV screen. Also, make sure the center speaker does not cross the line
formed by the leading edge of the front left and right speakers.
It is best to angle the speakers towards the listening position. The angle depends on the
size of the room. Use less of an angle for bigger rooms.
The optimal positioning for surround speakers is just above ear height. Make sure the
speakers don’t face each other. For DVD-Audio, the speakers should be more directly
behind the listener than for home theater playback.
Try not to place the surround speakers farther away from the listening position than the
front and center speakers. Doing so can weaken the surround sound effect.
CAUTION
Make sure that all speakers are securely installed. This not only improves sound quality,
but also reduces the risk of damage or injury resulting from speakers being knocked over
or falling in the event of external shocks such as earthquakes.
120
120
SL
L
SW
C
R
SR
5.1 channel surround system:
5
Kuuntelu laitteistolla
5
5
5
25
2
35
4
Listening to your system
Choosing the listening mode
This receiver offers a variety of listening modes to
accommodate playback of various audio formats. Choose
one according to your speaker environment or the source.
While listening to a source, press the listening mode
button repeatedly to select a listening mode you want.
The listening mode is shown on the display on the front
panel.
Important
The listening modes and many features described in this
section may not be available depending on the current
source, settings and status of the receiver.
Auto playback
The simplest, most direct listening option is the AUTO
SURROUND feature. With this, the receiver automatically
detects what kind of source you’re playing and selects
multichannel or stereo playback as necessary.
Press
AUTO/DIRECT
repeatedly until
AUTO SURROUND
shows briefly in the display (it will then show the decoding or
playback format). Check the digital format indicators in the
display to see how the source is being processed.
Note
Stereo surround (matrix) formats are decoded accordingly
using NEO:6 CINEMA (see Listening in surround sound
below for more on these decoding formats).
When listening to the BT AUDIO input, the Advanced
Sound Retriever AIR feature is selected automatically.
Advanced Sound Retriever AIR:
Suitable for listening to the sound from a BLUETOOTH
wireless technology device.
Listening in surround sound
Using this receiver, you can listen to any source in surround
sound. However, the options available will depend on your
speaker setup and the type of source you’re listening to.
If the source is Dolby Digital, DTS, or Dolby Surround
encoded, the proper decoding format will automatically be
selected and shows in the display.
When you select STEREO ALC (Auto Level Control stereo
mode), this unit equalizes playback sound levels if each
sound level varies with the music source recorded in a
portable audio player.
When you select STEREO, you will hear the source through
just the front left and right speakers (and possibly your
subwoofer depending on your speaker settings). Dolby
Digital and DTS multichannel sources are downmixed to
stereo.
The following modes provide basic surround sound for stereo
and multichannel sources.
PHASE
S.RETRIEVER
AV
ADJUST
MUTE
BASS
VOLUME
AUX
AUTO/
DIRECT
AUTO SURROUND
/
STREAM DIRECT
Type of surround modes Suitable sources
Two channel sources
STEREO ALC See above.
DOLBY PLII MOVIE Movie
DOLBY PLII MUSIC
a
Music
DOLBY PLII GAME Video games
NEO:6 CINEMA
b
Movie
NEO:6 MUSIC
b
Music
DOLBY PRO LOGIC Old movies
STEREO
c
See above.
ALC/
STANDARD
ALC/
STANDARD SURR
5
5
25
2
35
4
Listening to your system
Choosing the listening mode
This receiver offers a variety of listening modes to
accommodate playback of various audio formats. Choose
one according to your speaker environment or the source.
While listening to a source, press the listening mode
button repeatedly to select a listening mode you want.
The listening mode is shown on the display on the front
panel.
Important
The listening modes and many features described in this
section may not be available depending on the current
source, settings and status of the receiver.
Auto playback
The simplest, most direct listening option is the AUTO
SURROUND feature. With this, the receiver automatically
detects what kind of source you’re playing and selects
multichannel or stereo playback as necessary.
Press
AUTO/DIRECT
repeatedly until
AUTO SURROUND
shows briefly in the display (it will then show the decoding or
playback format). Check the digital format indicators in the
display to see how the source is being processed.
Note
Stereo surround (matrix) formats are decoded accordingly
using NEO:6 CINEMA (see Listening in surround sound
below for more on these decoding formats).
When listening to the BT AUDIO input, the Advanced
Sound Retriever AIR feature is selected automatically.
Advanced Sound Retriever AIR:
Suitable for listening to the sound from a BLUETOOTH
wireless technology device.
Listening in surround sound
Using this receiver, you can listen to any source in surround
sound. However, the options available will depend on your
speaker setup and the type of source you’re listening to.
If the source is Dolby Digital, DTS, or Dolby Surround
encoded, the proper decoding format will automatically be
selected and shows in the display.
When you select STEREO ALC (Auto Level Control stereo
mode), this unit equalizes playback sound levels if each
sound level varies with the music source recorded in a
portable audio player.
When you select STEREO, you will hear the source through
just the front left and right speakers (and possibly your
subwoofer depending on your speaker settings). Dolby
Digital and DTS multichannel sources are downmixed to
stereo.
The following modes provide basic surround sound for stereo
and multichannel sources.
PHASE
S.RETRIEVER
AV
ADJUST
MUTE
BASS
VOLUME
AUX
AUTO/
DIRECT
AUTO SURROUND
/
STREAM DIRECT
Type of surround modes Suitable sources
Two channel sources
STEREO ALC See above.
DOLBY PLII MOVIE Movie
DOLBY PLII MUSIC
a
Music
DOLBY PLII GAME Video games
NEO:6 CINEMA
b
Movie
NEO:6 MUSIC
b
Music
DOLBY PRO LOGIC Old movies
STEREO
c
See above.
ALC/
STANDARD
ALC/
STANDARD SURR
5
5
25
2
35
4
Listening to your system
Choosing the listening mode
This receiver offers a variety of listening modes to
accommodate playback of various audio formats. Choose
one according to your speaker environment or the source.
While listening to a source, press the listening mode
button repeatedly to select a listening mode you want.
The listening mode is shown on the display on the front
panel.
Important
The listening modes and many features described in this
section may not be available depending on the current
source, settings and status of the receiver.
Auto playback
The simplest, most direct listening option is the AUTO
SURROUND feature. With this, the receiver automatically
detects what kind of source you’re playing and selects
multichannel or stereo playback as necessary.
Press
AUTO/DIRECT
repeatedly until
AUTO SURROUND
shows briefly in the display (it will then show the decoding or
playback format). Check the digital format indicators in the
display to see how the source is being processed.
Note
Stereo surround (matrix) formats are decoded accordingly
using NEO:6 CINEMA (see Listening in surround sound
below for more on these decoding formats).
When listening to the BT AUDIO input, the Advanced
Sound Retriever AIR feature is selected automatically.
Advanced Sound Retriever AIR:
Suitable for listening to the sound from a BLUETOOTH
wireless technology device.
Listening in surround sound
Using this receiver, you can listen to any source in surround
sound. However, the options available will depend on your
speaker setup and the type of source you’re listening to.
If the source is Dolby Digital, DTS, or Dolby Surround
encoded, the proper decoding format will automatically be
selected and shows in the display.
When you select STEREO ALC (Auto Level Control stereo
mode), this unit equalizes playback sound levels if each
sound level varies with the music source recorded in a
portable audio player.
When you select STEREO, you will hear the source through
just the front left and right speakers (and possibly your
subwoofer depending on your speaker settings). Dolby
Digital and DTS multichannel sources are downmixed to
stereo.
The following modes provide basic surround sound for stereo
and multichannel sources.
PHASE
S.RETRIEVER
AV
ADJUST
MUTE
BASS
VOLUME
AUX
AUTO/
DIRECT
AUTO SURROUND
/
STREAM DIRECT
Type of surround modes Suitable sources
Two channel sources
STEREO ALC See above.
DOLBY PLII MOVIE Movie
DOLBY PLII MUSIC
a
Music
DOLBY PLII GAME Video games
NEO:6 CINEMA
b
Movie
NEO:6 MUSIC
b
Music
DOLBY PRO LOGIC Old movies
STEREO
c
See above.
ALC/
STANDARD
ALC/
STANDARD SURR
5
5
25
2
35
4
Listening to your system
Choosing the listening mode
This receiver offers a variety of listening modes to
accommodate playback of various audio formats. Choose
one according to your speaker environment or the source.
While listening to a source, press the listening mode
button repeatedly to select a listening mode you want.
The listening mode is shown on the display on the front
panel.
Important
The listening modes and many features described in this
section may not be available depending on the current
source, settings and status of the receiver.
Auto playback
The simplest, most direct listening option is the AUTO
SURROUND feature. With this, the receiver automatically
detects what kind of source you’re playing and selects
multichannel or stereo playback as necessary.
Press
AUTO/DIRECT
repeatedly until
AUTO SURROUND
shows briefly in the display (it will then show the decoding or
playback format). Check the digital format indicators in the
display to see how the source is being processed.
Note
Stereo surround (matrix) formats are decoded accordingly
using NEO:6 CINEMA (see Listening in surround sound
below for more on these decoding formats).
When listening to the BT AUDIO input, the Advanced
Sound Retriever AIR feature is selected automatically.
Advanced Sound Retriever AIR:
Suitable for listening to the sound from a BLUETOOTH
wireless technology device.
Listening in surround sound
Using this receiver, you can listen to any source in surround
sound. However, the options available will depend on your
speaker setup and the type of source you’re listening to.
If the source is Dolby Digital, DTS, or Dolby Surround
encoded, the proper decoding format will automatically be
selected and shows in the display.
When you select STEREO ALC (Auto Level Control stereo
mode), this unit equalizes playback sound levels if each
sound level varies with the music source recorded in a
portable audio player.
When you select STEREO, you will hear the source through
just the front left and right speakers (and possibly your
subwoofer depending on your speaker settings). Dolby
Digital and DTS multichannel sources are downmixed to
stereo.
The following modes provide basic surround sound for stereo
and multichannel sources.
PHASE
S.RETRIEVER
AV
ADJUST
MUTE
BASS
VOLUME
AUX
AUTO/
DIRECT
AUTO SURROUND
/
STREAM DIRECT
Type of surround modes Suitable sources
Two channel sources
STEREO ALC See above.
DOLBY PLII MOVIE Movie
DOLBY PLII MUSIC
a
Music
DOLBY PLII GAME Video games
NEO:6 CINEMA
b
Movie
NEO:6 MUSIC
b
Music
DOLBY PRO LOGIC Old movies
STEREO
c
See above.
ALC/
STANDARD
ALC/
STANDARD SURR
Valitse kuuntelutila
Vastaanotin tarjoaa useita kuuntelutiloja erilaisille
audioformaateille. Valitse niistä sopivin kaiutinasennuksen
tai äänilähteen perusteella.
Kun kuuntelet äänilähdettä, valitse haluamasi
kuuntelutila painamalla kuuntelutilan
valintanäppäimiä.
Tila näkyy etulevyn näyttöruudussa.
Tärkeä
Kuuntelutilaa ja sille kuvattuja ominaisuuksia ei aina
voi valita, riippuen äänilähteestä, asetuksista ja
vastaanottimen tilasta.
Auto playback
Yksinkertaisin ja suoraviivaisin kuuntelutila on AUTO
SURROUND. Siinä vastaanotin havaitsee automaattisesti
soitettavan lähteen tyypin ja valitsee tilanteen mukaan
monikanavaisen tai stereosoiton.
Paina
AUTO/DIRECT
useita kertoja, kunnes
näyttöruudussa näkyy pikaisesti AUTO SURROUND
(ja tämän jälkeen dekoodauksen ja soiton formaatit).
Katso näytöstä digitaalisen formaatin ilmaisimet ja näet,
kuinka äänilähdettä prosessoidaan.
Huomio
Stereo surround-formaatit dekoodataan käyttäen NEO:6
CINEMAa (katso lisää dekoodauksen formaateista
alempaa: Surroundäänen kuuntelu).
Advanced Sound Retriever AIR-ominaisuus valitaan
automaattisesti kuunneltaessa BT AUDIO -tuloa.
Advanced Sound Retriever AIR:
Soveltuu äänen kuunteluun langattomasta
BLUETOOTH-laitteesta.
Surroundäänen kuuntelu
Tällä vastaanottimella voit kuunnella kaikkia äänilähteitä
surroundäänellä. Käytettävissä olevat ominaisuudet
riippuvat kuitenkin kuunneltavasta lähteestä ja
kaiutinasennuksista.
Jos äänilähteen koodauksena on Dolby Digital, DTS tai
Dolby Surround, näille valitaan automaattisesti sopiva
dekoodaus, mikä näkyy näyttöruudussa.
Kun valitset STEREO ALC (Auto Level Control
-stereotila), laite tasoittaa soiton äänentasot, jos ne
vaihtelevat kannettavalla soittimella tallentamisen vuoksi.
Kun valitset STEREO, ääni kuuluu vain vasemmasta ja
oikeasta etukaiuttimesta (ja asetuksista riippuen, ehkä
alataajuuskaiuttimesta). Monikanavaiset Dolby Digital- ja
DTS-äänilähteet miksataan stereoksi.
Seuraavissa tiloissa saat stereo- ja monikanavaisille
äänilähteille perussurroundäänen.
Surroundtilan tyyppi Sopivat äänilähteet
Kaksikanavaiset lähteet
Katso yllä
Elokuva
Musiikki
Videopelit
Elokuva
Musiikki
Vanhat elokuvat
Katso yllä
25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Pioneer VSX-531D wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Pioneer VSX-531D

Pioneer VSX-531D Bedienungsanleitung - Deutsch - 41 seiten

Pioneer VSX-531D Bedienungsanleitung - Englisch - 41 seiten

Pioneer VSX-531D Bedienungsanleitung - Holländisch - 41 seiten

Pioneer VSX-531D Bedienungsanleitung - Französisch - 41 seiten

Pioneer VSX-531D Bedienungsanleitung - Italienisch - 41 seiten

Pioneer VSX-531D Bedienungsanleitung - Spanisch - 41 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info