Bedienungsanleitung Pioneer VSX-816-K (Seite 38 von 68) (Englisch)

574181

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

The System Setup menu07

• ALL CH ADJUST – A ‘flat’ setting where all

the speakers are set individually so no

special weighting is given to any one

channel.

• FRONT ALIGN – All speakers are set in

accordance with the front speaker settings

(no equalization is applied to the front left

and right channels).

You return to the Acoustic Cal EQ setup menu

after the Acoustic Calibration Equalization is

set.

Copying your Acoustic Calibration EQ

settings

If you want to manually adjust the Acoustic

Calibration EQ (see Setting the Acoustic

Calibration EQ manually below), we

recommend copying the ALL CH ADJUST or

the FRONT ALIGN settings from the EQ AUTO

setup above (or from Automatically setting up

for surround sound (MCACC) on page 9) to one

of the custom settings. Instead of just a flat EQ

curve, this will give you a reference point from

which to start.

1 Select ‘EQ Data Copy’ from the Manual

MCACC setup menu.

2 Select CUSTOM1 or CUSTOM2 then use

/ to select the setting you want to

copy.

• You can also copy from one custom setting

to another. For more on the ALL CH

ADJUST and FRONT ALIGN settings, see

Setting the Acoustic Calibration EQ

automatically above.

3 Select ‘OK’ to copy and confirm.

Setting the Acoustic Calibration EQ

manually

Before manually adjusting the Acoustic

Calibration EQ, we recommend copying the

ALL CH ADJUST or the FRONT ALIGN

settings from the auto setup above (or from

Automatically setting up for surround sound

(MCACC) on page 9) to one of the custom

settings. Instead of just a flat EQ curve, this will

give you a reference point from which to start

(see Copying your Acoustic Calibration EQ

settings above for how to do this).

1 Select ‘EQ CUSTOM1 Adjust or EQ

CUSTOM2 Adjust’ from the Manual MCACC

setup menu.

2 Select which method you would like to

use to adjust the overall frequency balance.

It is best to choose whichever one you copied

to the custom setting in Copying your Acoustic

Calibration EQ settings above.

• ALL CH ADJUST – All the speakers can be

set independently so no special weighting

is given to any one channel. When

adjusting, test tones will sound for each

individual channel.

• FRONT ALIGN – Speakers are set in

accordance with the front speaker

settings. The sound of the test tone will

alternate between the left front (reference)

speaker and the target speaker.

3.Manual MCACC

:Return

a.Fine Ch Level

b.Fine SP Distance

c.EQ AUTO Setting

d.EQ Data Copy

e.EQ CUSTOM1 Adjust

f .EQ CUSTOM2 Adjust

g.EQ Data Check

3d.EQ Data Copy

:Cancel

TO FROM

CUSTOM1 CUSTOM1

CUSTOM2 [ CUSTOM2 ]

Start Copy [ OK ]

3d.EQ Data Copy

:Cancel

TO FROM

CUSTOM1 ALL CH ADJ

CUSTOM2 [ CUSTOM2 ]

Start Copy [ OK ]

3.Manual MCACC

:Return

a.Fine Ch Level

b.Fine SP Distance

c.EQ AUTO Setting

d.EQ Data Copy

e.EQ CUSTOM1 Adjust

f .EQ CUSTOM2 Adjust

g.EQ Data Check

3e.EQ CUSTOM1 Adjust

Test Tone Type

ALL CH ADJUST

ENTER:Next :Cancel

06_System_setup.fm 38 ページ２００５年１２月９日　金曜日　午前１０時２６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-816-K Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info