Bedienungsanleitung Pioneer VSX-816-K (Seite 40 von 68) (Englisch)

574181

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

The System Setup menu07

1 Select ‘Manual SP Setup’ then press

ENTER.

2 Select the setting you want to adjust.

If you are doing this for the first time, you may

want to adjust these settings in order:

•

Speaker Setting

– Specify the size and

number of speakers you’ve connected

(page 40).

•

Crossover Network

– Specify which

frequencies will be sent to the subwoofer

(see

Crossover Network

below).

•

Channel Level

– Adjust the overall balance

of your speaker system (page 41).

•

Speaker Distance

– Specify the distance

of your speakers from the listening position

(page 42).

3 Make the adjustments necessary for

each setting, pressing RETURN to confirm

after each screen.

Speaker Setting

Use this setting to specify your speaker

configuration (size, number of speakers). It is a

good idea to make sure that the settings made

Automatically setting up for surround sound

(MCACC)

on page 9 are correct.

1 Select ‘Speaker Setting’ from the

Manual SP Setup menu.

2 Choose the set of speakers that you

want to set then select a speaker size.

Use

/

to select the size (and number) of

each of the following speakers:

•

Front

– Select

LARGE

if your front

speakers reproduce bass frequencies

effectively, or if you didn’t connect a

subwoofer. Select

SMALL

to send the bass

frequencies to the subwoofer.

•

Center

– Select

LARGE

if your center

speaker reproduces bass frequencies

effectively, or select

SMALL

to send bass

frequencies to the other speakers or

subwoofer. If you didn’t connect a center

speaker, choose

(the center channel is

sent to the front speakers).

•

Surr

– Select

LARGE

if your surround

speakers reproduce bass frequencies

effectively. Select

SMALL

to send bass

frequencies to the other speakers or

subwoofer. If you didn’t connect surround

speakers choose

(the sound of the

surround channels is sent to the front

speakers or a subwoofer).

System Setup

1.Surr Back System

2.Auto MCACC

3.Manual MCACC

4.Manual SP Setup

5.Input Assign

6.Other Setup

 : Exit

4.Manual SP Setup

:Return

a.Speaker Setting

b.Crossover Network

c.Channel Level

d.Speaker Distance

Note

1 If you select

SMALL

for the front speakers the subwoofer will automatically be fixed to

YES

. Also, the center, surround, and

surround back speakers can’t be set to

LARGE

if the front speakers are set to

SMALL

. In this case, all bass frequencies are sent

to the subwoofer.

4.Manual SP Setup

:Return

a.Speaker Setting

b.Crossover Network

c.Channel Level

d.Speaker Distance

4a.Speaker Setting

Front SMALL

Center [ SMALL ]

Surr [ SMALL ]

SB [

SMALL x2

]

SUB W. [ YES ]

:Finish

VSX_816.book.fm 40 ページ２００５年１２月８日　木曜日　午後６時５４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-816-K Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info