Bedienungsanleitung Pioneer VSX-827-K (Seite 22 von 68) (Englisch)

491882

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Connecting your equipment

Connecting an iPod

This receiver has a dedicated iPod terminal that will allow you

to control playback of audio content from your iPod using the

controls of this receiver.



Switch the receiver into standby, and then use the iPod

cable to connect your iPod to the iPod iPhone iPad USB

terminal on the front panel of this receiver.

•

VSX-527 only: The iPod cable is not included with this

receiver. The optional iPod cable from Pioneer is sold

separately under the part number L308102013030-IL.

Contact the Pioneer Customer Support division for more

information on obtaining an optional iPod cable.

•

The cable that comes with the iPod can also be used to

connect the iPod. Connect the iPod terminal and the iPod

iPhone iPad USB terminal on the receiver. The videos and

images on the iPod cannot be viewed using this

connection.

•

For the cable connection, refer to also the operating

instructions for iPod.

•

For instructions on playing the iPod, see Playing an iPod on

page 27.

Plugging in the receiver

Only plug in after you have connected all your components to

this receiver, including the speakers.

CAUTION

•

Handle the power cord by the plug part. Do not pull out the

plug by tugging the cord, and never touch the power cord

when your hands are wet, as this could cause a short

circuit or electric shock. Do not place the unit, a piece of

furniture, or other object on the power cord or pinch the

cord in any other way. Never make a knot in the cord or tie

it with other cables. The power cords should be routed so

that they are not likely to be stepped on. A damaged power

cord can cause a fire or give you an electric shock. Check

the power cord once in a while. If you find it damaged, ask

your nearest Pioneer authorized independent service

company for a replacement.

•

Do not use any power cord other than the one supplied with

this unit.

•

Do not use the supplied power cord for any purpose other

than that described below.

•

The receiver should be disconnected by removing the

mains plug from the wall socket when not in regular use,

e.g., when on vacation.

Note

•

After this receiver is connected to an AC outlet, a 2 second

to 10 second HDMI initialization process begins. You

cannot carry out any operations during this process. The

HDMI indicator in the front panel display blinks during this

process, and you can turn on this receiver once it has

stopped blinking. When you set the Control with HDMI to

OFF, you can skip this process. For details about the

Control with HDMI feature, see HDMI Setup

on page 53.

Plug the supplied power cord into the AC IN socket on

the back of the receiver.

Plug the other end into a power outlet.

MASTER

VOLUME

iPod iPhone iPad

DIRECT CONTROL

SOUND

RETRIEVER AIR

ADVANCED

SURROUND

MCACC

SETUP

MIC

VIDEO

BAND TUNER EDIT TUNE PRESET ENTER

HDMI

iPod iPhone iPad

iPod

iPhone

iPad

ALC/

STANDARD SURR

O SURROUND

EAM DIRECT

USB

CONTROL ON

OFF

iPod/iPhone/iPad

iPod cable

(VSX-827: supplied/

VSX-527: sold separately)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-827-K Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-827-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info