Bedienungsanleitung Pioneer VSX-827-K (Seite 24 von 68) (Englisch)

491882

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Basic Setup

Select ‘Auto MCACC’ from the Home Menu, then press

ENTER

•

Mic In! blinks when the microphone is not connected

to MCACC SETUP MIC jack.

Try to be as quiet as possible after pressing

ENTER

. The

system outputs a series of test tones to establish the

ambient noise level.

Follow the instructions on-screen.

•

Make sure the microphone is connected.

•

Make sure the subwoofer is on and the volume is

turned up.

•

When using surround back or front height speakers,

turn on the power to the amplifier to which the

surround back or front height speakers are connected,

and adjust the sound level to the desired level.

•

See below for notes regarding background noise and

other possible interference.

Wait for the test tones to finish.

A progress report is displayed on-screen while the

receiver outputs test tones to determine the speakers

present in your setup. Try to be as quiet as possible while

it’s doing this.

•

For correct speaker settings, do not adjust the volume

during the test tones.

Confirm the speaker configuration.

The configuration shown on-screen should reflect the

actual speakers you have.

•

With error messages (such as Too much ambient

noise) select RETRY after checking for ambient noise

(see Other problems when using the Auto MCACC

setup below).

If the speaker configuration displayed isn’t correct, use

/

to select the speaker and

/

to change the

setting. When you’re finished, go to the next step.

If you see an error message (ERR) in the right side

column, there may be a problem with the speaker

connection. If selecting RETRY doesn’t fix the problem,

turn off the power and check the speaker connections.

Make sure ‘OK’ is selected, then press

ENTER

If the screen in step 8 is left untouched for 10 seconds

and

ENTER

is not pressed in step 9, the Auto MCACC

setup will start automatically as shown.

A progress report is displayed on-screen while the

receiver outputs more test tones to determine the

optimum receiver settings for channel level, speaker

distance, and Acoustic Calibration EQ.

Again, try to be as quiet as possible while this is

happening. It may take 1 to 3 minutes.

The Auto MCACC setup has finished! You return to the

Home Menu.

The settings made in the Auto MCACC setup should give

you excellent surround sound from your system, but it is

also possible to adjust these settings manually using the

Home Menu (starting on page 47

Note

•

Depending on the characteristics of your room, sometimes

identical speakers with cone sizes of around 12 cm will end

up with different size settings. You can correct the setting

manually using the Speaker Setting

on page 47.

•

The subwoofer distance setting may be farther than the

actual distance from the listening position. This setting

should be accurate (taking delay and room characteristics

into account) and generally does not need to be changed.

Other problems when using the Auto MCACC

setup

If the room environment is not optimal for the Auto MCACC

setup (too much background noise, echo off the walls,

obstacles blocking the speakers from the microphone) the

final settings may be incorrect. Check for household

appliances (air conditioner, fridge, fan, etc.), that may be

affecting the environment and switch them off if necessary. If

there are any instructions showing in the front panel display,

please follow them.

•

Some older TVs may interfere with the operation of the

microphone. If this seems to be happening, switch off the

TV when doing the Auto MCACC setup.

Home Menu

. Auto MCACC

. Manual SP Setup

. Input Assign

. Speaker System

. Video Parameter

. HDMI Setup

. Auto Power Down

. Network Standby

. FL Demo Mode

Home Menu

. Auto MCACC

. Manual SP Setup

. Input Assign

. Pre Out Setting

. HDMI Setup

. Auto Power Down

. Network Standby

. FL Demo Mode

VSX-827

VSX-527

. Auto MCACC

Now Analyzing

Environment Check

Ambient Noise

Speaker YES/NO

Return

. Auto MCACC

Check!

Return

10:Next

Front

Center

Surr

Surr. Back

Subwoofer

[ YES ]

[

---

]

[ YES ]

. Auto MCACC

Now Analyzing

Surround Analyzing

Speaker System

Speaker Distance

Channel Level

Acoustic Cal EQ

Return

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-827-K Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-827-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info