Bedienungsanleitung Pioneer VSX-827-K (Seite 25 von 68) (Englisch)

491882

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Chapter

Basic playback

Playing a source

Here are the basic instructions for playing a source (such as

a DVD disc) with your home theater system.

Switch on your system components and receiver.

Start by switching on the playback component (for

example a DVD player), your TV and subwoofer (if you

have one), then the receiver (press



RECEIVER

•

Make sure the setup microphone is disconnected.

Switch the TV input to the input that connects this

receiver.

For example, if you connected this receiver to the VIDEO

jacks on your TV, make sure that the VIDEO input is now

selected.

Press input function buttons to select the input function

you want to play.

•

The input of the receiver will switch over, and you will

be able to operate other components using the remote

control. To operate the receiver, first press

on the remote control, then press the appropriate

button to operate.

•

The input source can also be selected by using

INPUT

SELECT

buttons on the remote control, or by

using the front panel

INPUT SELECTOR

dial. In this

case, the remote control won’t switch operational

modes.

If you selected the proper input source and there is still

no sound, select the audio input signal for playback (see

Selecting the audio input signal

below).

Press

AUTO/DIRECT

to select ‘AUTO SURROUND’ and

start playback of the source.

If you’re playing a Dolby Digital or DTS surround sound

DVD disc, with a digital audio connection, you should

hear surround sound. If you’re playing a stereo source or

if the connection is an analog audio connection, you will

only hear sound from the front left/right speakers in the

default listening mode.

It is possible to check on the front panel display whether

or not surround sound playback is being performed

properly.

When using a surround back speaker, 2D+PLIIx is

displayed when playing Dolby Digital 5.1-channel signals,

and DTS+NEO:6 is displayed when playing DTS 5.1-

channel signals.

When not using a surround back speaker, 2D is

displayed when playing Dolby Digital signals.

If the display does not correspond to the input signal and

listening mode, check the connections and settings.

Note

•

You may need to check the digital audio output settings on

your DVD player or digital satellite receiver. It should be set

to output Dolby Digital, DTS and 88.2 kHz/96 kHz PCM (2

channel) audio, and if there is an MPEG audio option, set

this to convert the MPEG audio to PCM.

•

Depending on your DVD player or source discs, you may

only get digital 2 channel stereo and analog sound. In this

case, the receiver must be set to a multichannel listening

mode if you want multichannel surround sound.

Use

VOLUME +/–

to adjust the volume level.

Turn down the volume of your TV so that all sound is

coming from the speakers connected to this receiver.

Selecting the audio input signal

The audio input signal can be selected for each input source.

Once it is set, the audio input that was selected will be applied

whenever you select the input source using the input function

buttons.



Press , then press

SIGNAL SEL

to select the

audio input signal corresponding to the source

component.

Each press cycles through the following:

•

H – Selects an HDMI signal. H can be selected for BD,

DVD, SAT/CBL, DVR/BDR, VIDEO or GAME input. For

other inputs, H cannot be selected.

When the HDMI option in Setting the Audio options

on page 37 is set to THRU, the sound will be heard

through your TV, not from this receiver.

•

A – Selects the analog inputs.

•

C1/O1 – Selects the digital input. The coaxial 1 input is

selected for C1, and the optical 1 audio input is

selected for O1.

When H (HDMI) or C1/O1 (digital) is selected and the

selected audio input is not provided, A (analog) is

automatically selected.

Note

•

BD, DVR/BDR, VIDEO and GAME inputs are fixed to H

(HDMI). It cannot be changed.

•

For the TV input, only A (analog) or C1/O1 (digital) can be

selected. However, if the ARC at HDMI Setup is set to ON,

the input is fixed to H (HDMI) and cannot be changed.

•

When set to H (HDMI) or C1/O1 (digital), 2 lights when a

Dolby Digital signal is input, and DTS lights when a DTS

signal is input.

•

When the H (HDMI) is selected, the A and DIGITAL

indicators are off (see page 8

ENTER

MUTE

RETURN

AUDIO

PARAMETER

HOME

TOOLS

BAND

iPod CTRL

PTY

TOP

SLEEP

INPUT

RECEIVER

SOURCE

RECEIVER

SLEEP

INPUT

RECEIVER

SOURCE

DISP

CLR

ENTER

SHIFT

RECEIVER

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-827-K Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-827-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info