Bedienungsanleitung Pioneer VSX-9120TXH-k (Seite 77 von 88) (Englisch)

574198

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

Additional information

Remote control

HDMI

When playing a disc, the

PL II

Neo:6

indicator lights

on the receiver.

• Make sure that the receiver is set to

AUTO

DIGITAL

(see

Choosing the input signal

on page 29).

• If a two channel soundtrack is currently playing (including Dolby Surround encoded), then this is not a

malfunction. Check the disc packaging for details about the audio tracks available.

During playback of a Surround

EX or DTS-ES source on the

SBch

AUTO

setting, the

and

indicators don’t light, or the

signal is not properly processed.

• The source may be Dolby Surround EX / DTS-ES software, but it has no flag to indicate it is 6.1

compatible. Set to

SBch ON

(see

Using surround back channel processing

on page 29) then switch to the

THX Surround EX or Standard EX listening mode (see

Listening in surround sound

on page 26).

During playback of DVD-Audio,

the display shows

PCM

• This will occur when playing DVD-Audio material over the HDMI connection. This is not a malfunction.

Symptom

Remedy

Symptom Remedy

Cannot be remote controlled. • Try replacing the batteries in the remote control (see

Loading the batteries

on page 7).

• Be sure to operate within 7 m (23 feet) and a 30º angle of the remote sensor on the front panel (see

Operating range of remote control unit

on page 22).

• Check that there are no obstacles between the receiver and the remote control.

• Make sure that there is no fluorescent or other strong light shining on to the remote sensor.

• Check the connections of the

CONTROL IN

jack (see

Operating other Pioneer components with this unit’s

sensor

on page 72).

Other components can’t be

operated with the system remote.

• If the battery ran down, the preset codes may have been cleared. Re-enter the preset codes.

• The preset code may be incorrect. Redo the procedure for entering preset codes.

The SR cable is connected, but

the connected components can’t

be operated with the remote.

• Reinsert the SR cable, making sure it’s connected to the right jack (see

Using this receiver with a Pioneer

plasma display

on page 57).

• Make sure that there is an analog or HDMI connection between the units. This is necessary for the SR

feature to work.

• Check that the other component is made by Pioneer. The SR feature only works with Pioneer equipment.

Symptom

Remedy

The HDMI indicator blinks

continuously.

• Check all the points below.

No picture or sound. • This receiver is HDCP-compatible. Check that the components you are connecting are also HDCP-

compatible. If they are not, please connect them using the component, S-video or composite video jacks.

• Depending on the connected source component, it’s possible that it will not work with this receiver (even

if it is HDCP-compatible). In this case, connect using the component, S-video or composite video jacks

between source and receiver.

• If the problem still persists when connecting your HDMI component directly to your monitor, please

consult the component or monitor manual or contact the manufacturer for support.

• If video images do not appear on your TV or plasma display, check the

I/P. CONV

setting or try adjusting

the resolution, DeepColor or other setting for your component.

• If ‘

NOT SUPPORT

’ appears in the receiver’s display, check the

I/P. CONV

setting or try adjusting the

resolution, DeepColor or other setting for your component.

• While analog video signals are being output over HDMI, use a separate connection for audio output.

No sound, or sound suddenly

ceases.

• Check that the HDMI AV setting is set to

AMP/THROUGH

• If the component is a DVI device, use a separate connection for the audio.

• Check the audio output settings of the source component.

Noisy or distorted picture. • Sometimes a video deck may output a noisy video signal (during scanning, for example), or the video

quality may just be poor (with some video game units, for example). The picture quality may also depend on

the settings, etc. of your display device. Switch off the video converter and reconnect the source and display

device using the same type of connection (component, S-video or composite), then start playback again.

• If the problem still persists when connecting your HDMI component directly to your monitor, please

consult the component or monitor manual or contact the manufacturer for support.

VSX-9120TXH_KU.book 77 ページ２００７年４月１２日　木曜日　午前１１時４７分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-9120TXH-k Seite 77

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-9120TXH-k

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info