Bedienungsanleitung Pioneer VSX-9140TXH (Seite 86 von 123) (Englisch)

574068

Zoom out

Zoom in

Vorherige Seite

1/123

Nächste Seite

The Advanced MCACC menu

5If ‘

Advanced EQ Setup

’ is selected, select the

MCACC memory to be stored, then enter the desired

time setting for calibration, and then select

START

Based on the reverb measurement above, you can

choose the time period that will be used for the final

frequency adjustment and calibration. Even though you

can make this setting without reverb measurement, it is

best to use the measurement results as a reference for

your time setting. For an optimal system calibration

based on the direct sound coming from the speakers, we

recommend using the 30-50ms setting.

Use / to select the setting. Use / to switch

between them.

Select the setting from the following time periods (in

milliseconds): 0-20ms, 10-30ms, 20-40ms, 30-50ms, 40-

60ms, 50-70ms and 60-80ms. This setting will be applied

to all channels during calibration.

When you’re finished, select START. It will take about 2

to 4 minutes for the calibration to finish.

After the Acoustic Calibration Equalization is set, you are

given the option to check the settings on-screen.

Checking MCACC Data

At the procedure of Automatically setting up for surround

sound (Auto MCACC) on page 41, the procedure of

Automatic MCACC (Expert) on page 78 or after fine-

adjusting at Manual MCACC setup on page 80, you can

check your calibrated settings using the GUI screen or, if

a computer is connected, on the computer’s screen.

1 Press , then press

HOME MENU

A Graphical User Interface (GUI) screen appears on your

TV. Use /// and ENTER to navigate through the

screens and select menu items. Press RETURN to

confirm and exit the current menu.

2 Select ‘

MCACC Data Check

’ from the

HOME

3 Select the setting you want to check.

• Speaker Setting – Used to check the settings of the

speaker systems. See Speaker Setting below for more

on this.

• Channel Level – Used to check the output level of the

different speakers. See Channel Level below for more

on this.

• Speaker Distance – Used to check the distance to

the different speakers. See Speaker Distance below

for more on this.

• Standing Wave – Used to check the standing wave

control filter settings. See Standing Wave on page 87

for more on this.

• Acoustic Cal EQ –

Used to check the calibration

values of the listening environment’s frequency

response. See

Acoustic Cal EQ on page 87

for more on

this.

• Output PC – See Output PC on page 88 for more on

this.

4 Press

RETURN

to go back to

MCACC Data Check

menu, repeating steps 2 and 3 to check other settings.

5 When you’re finished, press

RETURN

You will return to the HOME MENU.

MCACC : M1.MEMORY 1

1c5c.Adv.EQ Setup

A/V RECEIVER

Exit Cancel

START

Time Position : 30-50ms

EQ Type : SYMMETRY

STAND.WAVE Multi-Point

: NO

MCACC : M1.MEMORY 1

1c5c.Adv.EQ Setup

A/V RECEIVER

Exit Cancel

START

Time Position : 30-50ms

EQ Type : SYMMETRY

STAND.WAVE Multi-Point

: NO

RECEIVER

1. Advanced MCACC

2. MCACC Data Check

3. Data Management

4. System Setup

Exit Return

HOME MENU

A/V RECEIVER

a. Speaker Setting

b. Channel Level

c. Speaker Distance

2.MCACC Data Check

d. Standing Wave

e. Acoustic Cal EQ

f. Output PC

A/V RECEIVER

Exit Return

VSX-9140TXH_CUXJ.book 86 ページ２００９年４月１６日　木曜日　午前１０時３６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-9140TXH Seite 86

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info