Bedienungsanleitung Pioneer VSX-9140TXH (Seite 88 von 123) (Englisch)

574068

Zoom out

Zoom in

Vorherige Seite

1/123

Nächste Seite

The Advanced MCACC menu

Output PC

Before continuing, make sure you have completed step 2

in Checking MCACC Data on page 86. The data measured

with the Advanced MCACC function is transmitted to the

connected computer.

The 3D graphs of the reverb

characteristics before and after calibration and the

MCACC results (parameters) can be checked.

1 Select ‘

Output PC

’ from

MCACC Data Check

and press

ENTER

When the receiver is ready for transmission, Start the

MCACC application on your PC shows on the GUI

screen.

2 Start the MCACC application on your computer.

Follow the instructions provided with the application. It

will take about ten seconds for the transmission to

complete, then you will be able to analyze the output on

your computer. The various parameters and the reverb

characteristics data used for display on the computer are

not cleared when the power is tur ned off. If the reverb

characteristics are re-measured, however, the data is

overwritten.

3 When you’re finished, press

RETURN

You will return to the MCACC Data Check menu.

Continue with other operations in the MCACC Data

Check menu if necessary. Press RETURN again to exit

the MCACC Data Check menu.

Data Management

This system allows you to store up to six MCACC presets,

allowing you to calibrate your system for different

listening positions (or frequency adjustments for the

same listening position).

This is useful for alternate

settings to match the kind of source you’re listening to

and where you’re sitting (for example, watching movies

from a sofa, or playing a video game close to the TV).

From this menu you can copy from one preset to another,

name presets for easier identification and clear any ones

you don’t need.

1 Press , then press

HOME MENU

A Graphical User Interface (GUI) screen appears on your

TV. Use /// and ENTER to navigate through the

screens and select menu items. Press RETURN to

confirm and exit the current menu.

2 Select ‘

Data Management

’ from the

HOME MENU

3 Select the setting you want to adjust.

• Memory Rename – Name your MCACC presets for

easy identification (see Renaming MCACC presets

below).

• MCACC Memory Copy – Copy settings from one

MCACC preset to another (see Copying MCACC

preset data below).

• MCACC Memory Clear – Clear any MCACC presets

that you don’t want (see Clearing MCACC presets on

page 89).

Note

1To transmit data, the receiver and computer must be connected using an RS-232C cable and a special application must be installed on the

computer. See Connecting a PC for Advanced MCACC output on page 36 for more on this.

2 Only one set of reverb characteristics is stored on the receiver. If you wish to compare several different measurement results, transmit the

data to the computer each time reverb measurements are taken.

Start the MCACC application on your PC.

2f.Output PC

Exit Cancel

A/V RECEIVER

3 This can be done in Automatically setting up for surround sound (Auto MCACC) on page 41 or Automatic MCACC (Expert) on page 78, either of

which you should have already completed.

RECEIVER

1. Advanced MCACC

2. MCACC Data Check

3. Data Management

4. System Setup

Exit Return

HOME MENU

A/V RECEIVER

a. Memory Rename

b. MCACC Memory Copy

c. MCACC Memory Clear

3.Data Management

A/V RECEIVER

Exit Return

VSX-9140TXH_CUXJ.book 88 ページ２００９年４月１６日　木曜日　午前１０時３６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-9140TXH Seite 88

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info