Bedienungsanleitung Pioneer VSX-AX5i-S (Seite 111 von 120) (Englisch)

574069

111

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

Techno Tidbits and Problem-solving

111

EXPERT

The LARGE and SMALL

settings for speakers after the

Auto Surround Sound Setup

are incorrect.

• There are other frequencies in the room

that are affecting the auto setup.

• Check for household appliances (air

conditioner, fan, etc.) that may be

affecting the environment and switch

them off if necessary.

After the proper settings have

been made, there still seems

to be something wrong with

the sound.

• The speakers have been incorrectly con-

nected (left and right connections are

reversed).

• Check all connections. Be sure match

the right channel on the speaker with

the right channel on the speaker termi-

nals (see page 25).

No sound is output when a

function is selected.

• Improper connections.

•Sound is muted.

• The volume is turned down.

• Speakers are turned off.

• DIGITAL/ANALOG setting is incorrect.

• MULTI CH IN mode is on.

• Make sure the component/speakers

are connected correctly (see pages 16,

17, 20, 22, 24 and 25).

• Press MUTING on the remote control.

• Adjust MASTER VOLUME.

• Press SPEAKERS (A/B) to select the

speakers you connected (see page 76).

• Select the proper signal with the SIG-

NAL SELECT button (see page 46).

• Turn MULTI CH IN mode off (see

page 54).

No sound output from the

front speakers.

• The front speakers aren't connected

properly.

• Check all connections (see page 25).

No sound output from

surround or center speakers.

• Speaker settings are incorrect.

• The surround or center speakers aren't

connected properly.

• The listening mode is STEREO.

• See SPEAKER SETTING on page 41 to

check the speaker settings.

• Check all connections (see page 25).

• Choose a surround listening mode

(see page 45).

No sound output from the

subwoofer.

• The subwoofer setting is NO.

• The subwoofer output setting is too low.

• The bass peak level setting is too low.

• There is very little low frequency informa-

tion in your source.

• The crossover frequency is set too low.

• There is a problem with the subwoofer.

• The subwoofer isn't connected properly.

• Change the setting to YES or PLUS

(see page 41).

• Adjust the output setting to the level

you want (see pages 43 and 98).

• Adjust the bass peak level setting to

the level you want (see page 104).

• Change your subwoofer setting to one

of the following (see page 41):

Front: SMALL Subwoofer:YES

Front:LARGE Subwoofer:PLUS

• Raise the frequency level to match

your speakers' characteristics (see

page 97)

• Check the three following points:

1. Check the power.

2. Check the subwoofer volume

control.

3. Check the subwoofer hasn't

automatically switched to standby

mode (check the subwoofer manual).

• Check all connections (see page 25).

Cause

Remedy

No audio

Symptom

VSX-AX5i.book Page 111 Friday, May 23, 2003 6:33 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-AX5i-S Seite 111

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-AX5i-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info