Bedienungsanleitung Pioneer VSX-C301 (Seite 40 von 44) (Englisch)

455263

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Additional information

No sound from subwoofer. • The subwoofer is disconnected or switched

off.

• Connect or switch on the subwoofer (see page 13).

• The subwoofer's settings are incorrect. • Set the subwoofer (see page 31).

• Set the front speakers to Small (

) (see page 31).

• The subwoofer's levels are too low. • See on page 33 to check the speaker levels.

• The LFE Attenuator is set to

OFF

.• Set the LFE Attenuator to either

0 dB

10 dB

(see

page 32).

When a search is performed by a

DTS compatible CD player

during playback, noise is output.

• The search function performed by the player

slightly alters the digital information, making

it unreadable.

• This is not a malfunction, but be sure to turn the volume

down to prevent the output of loud noise from your

speakers.

The Dolby/DTS indicator doesn't

light when playing Dolby/DTS

software.

• The player is paused. • Press play.

• The player's sound output settings are

wrong.

• Set the player correctly (consult the manual that came

with the player, if necessary).

When playing a 96 kHz/24bit disc

the sound is too loud.

• Different discs have different recording

levels so some may be louder than others.

• Turn the volume down.

The sound distorts. • The analog signal is too strong. • Turn on input attenuator (see page 32).

• Master volume is too loud. • Turn the volume down.

You can only hear treble from

speakers.

• The front speakers are set to small (

). • Set the front speakers to large (

) (see page 31).

Sound is produced from analog

components, but not from digital

ones (DVD, LD, CD-ROM etc.).

• Digital connections are incorrect. • Make digital connections (see page 8)

• The digital output of the player is turned off. • Turn on the digital output of the player on (consult the

manual that came with the player, if necessary).

• The CD-ROM player is outputting a data

stream (not an audio signal) which is

incompatible with this receiver.

• Use a player that is compatible with this receiver.

• Digital connections are incorrect. • Make digital connections (see page 8).

• Analog input has been selected. • Select digital input (see page 29).

• The digital input assignment is wrong. • Assign the digital input (see page 32).

No sound is output or a noise is

output when Dolby Digital/DTS

software is played back.

• A DVD player not compatible with Dolby

Digital/DTS is being used.

• Make sure your DVD player is compatible with Dolby

Digital/DTS.

• The settings on the DVD player are incorrect

and/or the DTS signal output is turned off.

• Make sure the player's settings are correct and/or the

DTS signal out is on. Refer to the instruction manual

supplied with the DVD player.

• The digital output level is turned down on a

CD player or other component equipped with

digital output level adjustment capability. (The

DTS signal has been altered by the player, and

cannot be read.)

• Set the digital volume level of the player to full, or to the

neutral position.

The settings have all been

cleared.

• The receiver has been unplugged or the

main power turned off for more than a month.

• Set the receiver again (see page 31).

No image is output when an

input is selected.

• The video connections are incorrect. • Make sure the video component is connected correctly

(see page 12).

• The input source is not properly selected. • Make sure the proper component is selected by

pressing the correct function button (see page 22).

• The DVD/video player settings are incorrect. • Set correctly. Refer to the instruction manual supplied

with the DVD/video player.

The settings have all been

cleared.

• The receiver has been unplugged or the

main power turned off for more than a month.

• Set the receiver again (see page 31).

OVERLOAD

blinks in the display

and the power turns off

automatically.

• The speaker cable is shorting out the unit. • Make sure there are no loose strands of speaker wire

touching the metal casing of the receiver.

• The output is too high. • Turn the volume down.

You can't set the subwoofer

frequency crossover.

• All the speakers are set to either large (

) or

––

(i.e. no speakers are set to small).

• Change the speaker settings (see page 31).

The display is dark or off. • The display is set to dark or off. • Press

DIMMER

on the remote control repeatedly to

select a different brightness.

After making an adjustment the

display goes off.

• The display is set to off. • Press

DIMMER

on the remote control repeatedly to

select a different brightness.

Symptom

Cause Remedy

vsx-c301.book 40 ページ２００３年２月６日　木曜日　午後５時４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-C301 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-C301

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info