Bedienungsanleitung Pioneer VSX-C301 (Seite 41 von 44) (Englisch)

455263

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Additional information

English

• If the unit does not operate normally due to external

effects such as static electricity.

• Disconnect the power plug from the outlet and insert

again to return to normal operating conditions.

Surround sound formats

Below is a brief description of the main surround sound

formats you’ll find on DVDs, satellite, cable and

terrestrial broadcasts, and video cassettes.

Dolby Digital

You can identify Dolby Digital encoded source by the

following logo:

Dolby Digital is a multichannel digital audio coding

system widely used for DVD and digital broadcast

soundtracks. It can deliver up to six discrete audio

channels, comprising five full range channels and a

special LFE (low frequency effects) channel used mainly

for deep, rumbling sound effects; hence the term “5.1-

channel” Dolby Digital.

Dolby Pro Logic II and Dolby Surround

Dolby Pro Logic (and Pro Logic II) is a

decoding

system

that can extract four (five for Pro Logic II) channel

surround sound (front left/right, center, and surround

channels) from any stereo source.

Dolby Surround is an

encoding

system which embeds

surround sound information within a stereo soundtrack,

which a Dolby Pro Logic decoder can then use for

enhanced surround sound.

You can identify a Dolby Surround encoded source by

the following logo:

DTS Digital Surround

You can identify a DTS Digital Surround encoded source

by the following logo:

DTS Digital Surround is a 5.1-channel audio encoding

system from Digital Theater Systems Inc. for DVD

soundtracks. Like Dolby Digital, it provides six discrete

channels of audio, including an LFE channel.

The receiver cannot be remote

controlled.

• The remote control batteries have worn out. • Replace the batteries (see page 3).

• You are too far away or at a bad angle for

operation.

• Operate within 7 m, 30° of the remote sensor on the

front panel (see page 20).

• There is an obstacle between the receiver

and the remote control.

• Remove the obstacle or operate from another angle of

position.

• Strong light such as ﬂuorescent light. • Avoid exposing the remote sensor on the front panel to

direct light.

• The

CONTROL IN

jack has been hooked up. • Disconnect the

CONTROL IN

jack.

Other components cannot be

remote controlled.

• The proper code hasn't been input into the

remote control to control that component.

• Input the proper code into the remote control (see

page 34).

• The remote control is in a mode to make

some setting or control something on the

receiver.

• Press the button of the component you want to control.

• Something is plugged into the

CONTROL IN

jack (see page 16).

• Either point remote at the remote sensor of the unit that

is plugged into the

CONTROL IN

jack or unplug the cable

from the

CONTROL IN

jack and use remote normally.

The shutter of the optical

terminal doesn’t close after

removing plug.

• The plug was inserted improperly. • The terminal is ﬁne but the shutter won’t close.

Audio can be heard from an

analog input other than the one

currently selected.

• One of the SCART cables is not properly

connected.

• Re-plug in the SCART cables making sure that they are

fully inserted.

Symptom

Cause Remedy

vsx-c301.book 41 ページ２００３年２月６日　木曜日　午後５時４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-C301 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-C301

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info