Bedienungsanleitung Pioneer VSX-D710S (Seite 39 von 52) (Englisch)

455271

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Controlling the Rest of Your System

MEMO:

• Some commands from other remote controls cannot

be learned, but in most cases the remotes just need to

be moved closer together or farther apart.

• Certain buttons represent modes that cannot be

learned from other remote controls. These include:

RCV, CH SELECT, CH LEVEL, FUNCTION

LOUDNESS, FL DIMMER, MUTING and MASTER

VOLUME.

•

TV CONTROL buttons ( TV , VOL +/−, and TV

FUNC ) can only be learned in TV & TVC mode.

1 Press SETUP and hold for three seconds.

The LED on the remote control will light for two

seconds.

To cancel the SETUP mode at any time

Press SETUP.

The remote control will also return to the previous

mode after thirty seconds of inactivity.

2 Press the MULTI CONTROL button for the

component you want to control

3 Press and hold the RECEIVER button for

two seconds to start the LEARNING mode.

The LED lights steadily.

To cancel LEARNING setup mode

Press SETUP for one second.

If no commands are entered within thirty seconds the

remote will revert to its previous mode.

4 Point the two remote controls towards each

other. Press the button to be learned on this

receiver’s remote control (for example the 3

[play] button).

Point the remote controls directly at each other, about

2−5 cm apart, and press the button on the remote

control for the operation you want to program. The

LED flashes rapidly.

5 Press the corresponding button on the other

remote control to be taught to this receiver’s

remote control (in the above example the 3

[play] button).

Point the remote controls toward each other.

Press the button on the other remote control

corresponding to the operation you wish to program.

The LED on this receiver’s remote will go out and

then resume a steady light if the operation is learned.

If the operation hasn’t been learned for some reason

the LED will blink for three seconds and then light

steadily. If this happens press the teaching key

repeatedly, varying the distances between the

remotes, until you see the LED on this unit’s remote

light steadily, without blinking first.

To program additional operations for the current

component

Repeat steps 4 and 5.

To program operations for another component

Repeat steps 2 through 5.

6 Press and hold SETUP for one second to exit

the LEARNING setup mode.

After thirty seconds of inactivity the remote control

will automatically leave the LEARNING mode and

revert to its previous mode.

Erasing One of the Learning

Remote Control Button Settings

This erases one of the buttons you have programmed

and restores the factory installed preset to that button.

1 Press SETUP and hold for three seconds.

The LED on the remote control will light for two

seconds.

2 Press the MULTI CONTROL button relating to

the function of the button to be cleared.

The remote control will return to the previous mode

after thirty seconds of inactivity.

3 Press the RECEIVER button twice within

three seconds to start erase mode.

The LED blinks.

4 Press the button to be cleared for three

seconds.

The LED lights steadily for three seconds and then

goes off.

5 Repeat step 4 to erase other codes.

6 Press and hold the SETUP button for one

second to exit the erase mode.

−

5 cm

TVFUNC

VOLUME

MASTER VOLUME

TV CONTROL

AV PRE-PROGRAMMED AND LEARNING

REMOTE CONTROL UNIT

CHANNEL

ENTER

DISC

MPX

DISPLAY RF ATT

D.ACCESS

TUNE

CLASS

ATT

BAND

/DTS DSP

TEST TONE

CH SELECT CH LEVEL FUNCTION

SIGNAL SELECT

1¡4¢

EFFECT

DVD VCR CD-RTV

RCV

TUN

TVC

MIDNIGHT

LOUDNESS

MUTING

SETUP

FL DIMMER

MULTI CONTROL

5.1 / 7.1

RECEIVER

SOURCE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-D710S Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-D710S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info