Bedienungsanleitung Pioneer VSX-D710S (Seite 40 von 52) (Englisch)

455271

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Operating other Pioneer

Components

By connecting a control cord (optional), you can control

other Pioneer equipment using the remote control for

this unit. Point the remote control unit towards the

remote sensor of this unit, even when operating other

equipment.

The remote control signals are received by the remote

sensor of this unit, and sent to the other devices via the

CONTROL OUT terminal.

MEMO:

• You can also control Pioneer components by

pointing the receiver's remote control directly at the

component. This type of operation does not require

control cords.

• Whenever making the control jack connections, be

sure to also connect the analog input and output jacks.

System control does not function correctly when only

the digital input and output connections are made.

CONTROL

OUT

CONTROL

Clearing All the Remote

Control Settings

Clears all presets, all learned functions and restores the

factory presets.

1 Press SETUP and hold for three seconds.

The LED on the remote control lights for two

seconds.

If you want to cancel the CLEARING mode, press

SETUP.

The remote control will also return to the previous

mode after thirty seconds of inactivity.

2 Use the number buttons to enter 0123.

The LED lights for half a second for each digit input.

The LED lights for two seconds to indicate that the

setings have been restored to the factory presets. (If

the LED blinks three times, then you made a mistake

with the code—try re-entering it.)

Direct Function

The direct function is a useful feature which allows you

keep the receiver in one function (for example, CD)

while putting the remote control in a different function.

This could let you, for example, use the remote control

to set up and listen to a CD on the receiver and then use

the remote control to rewind a tape in your VCR while

you continue to listen to your CD player.

When the direct function is on any

MULTI CONTROL

button you press will change the function of both the

receiver and the remote control. When you turn the direct

function off, you can operate the remote control without

affecting the receiver. Thus you could switch the remote

control the VCR and operate that component while the

receiver plays a different component.

To set a MULTI CONTROL button to direct on or direct

off:

1 Press SETUP and hold for three seconds.

The LED on the remote control will light for two

seconds.

The remote control will also return to the previous

mode after thirty seconds of inactivity.

2 Press the MULTI CONTROL button that you

want to set up.

3 Use the number buttons to enter 9990

(direct on) or 9995 (direct off).

The LED will light for half a second on each digit

input. Then, the LED will light for two seconds to

indicate that it’s been correctly set. (If the LED blinks

three times, then you made a mistake with the

code—try re-entering it.)

MEMO:

• TVC doesn’t have this feature and thus can’t use the

direct function.

Controlling the Rest of Your System

Checking Preset Codes

To check which preset code is associated with a MULTI

CONTROL button:

1 Press SETUP and hold for three seconds.

The LED on the remote control lights for two

seconds.

2 Press the MULTI CONTROL button you want

to check the preset code for.

3 Press and hold ENTER for two seconds.

Each preset code consists of four digits, for example

1329. Each digit will be represented by a series of

blinks on the remote’s LED—3 blinks to represent

the digit “3”, etc. (“0” is represented by 10 blinks.)

Connect to CONTROL IN

terminal of other Pioneer

products with Î mark.

Remote control unit

VSX-D810S

( VSX-D710S)

Other Pioneer products

with Î mark

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-D710S Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-D710S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info