Bedienungsanleitung Pioneer VSX-S300-S (Seite 24 von 36) (Englisch)

491889

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Listening to your system

Using the Sound Retriever

When audio data is removed during the compression

process, sound quality often suffers from an uneven sound

image. The Sound Retriever feature employs new DSP

technology that helps bring CD quality sound back to

compressed 2-channel audio by restoring sound pressure

and smoothing jagged artifacts left over after compression.



Press S.RTRV to switch the SOUND RTRV (Sound

Retriever) ON or OFF.

Note

• The Sound Retriever is only applicable to 2-channel

sources.

Setting the Up Mix function

In a 7.1-channel surround system with surround speakers

placed directly at the sides of the listening position, the

surround sound of 5.1-channel sources is heard from the

side. The Up Mix function mixes the sound of the surround

speakers with the surround back speakers so that the

surround sound is heard from diagonally to the rear as it

should be.

• Using the Up Mix function is effective when the speakers

in the 7.1-channel surround system are set up as

recommended in the example on page 9.

• Depending on the positions of the speakers and the

sound source, in some cases it may not be possible to

achieve good results. In this case, set the setting to OFF.

Switch the receiver into standby.

Press and hold INPUT SELECTOR button on the front

panel for more than five seconds, and then press TUNER

button on the remote control.

UPMIX OFF appears and the Up Mix function turns off. If you

want to turn this function on, perform steps 1 and 2 again.

Note

•Set to ON regardless of this setting when playing DTS-HD

signals.

• May automatically be set to OFF even when set to ON,

depending on the input signal and listening mode.

Setting the Audio options

There are a number of additional sound settings you can

make using the TOOLS menu. The defaults, if not stated, are

listed in bold.

Important

• Note that if a setting doesn’t appear in the TOOLS menu,

it is unavailable due to the current source, settings and

status of the receiver.

Press , then press TOOLS button.

Use

/

to select the setting you want to adjust.

Depending on the current status/mode of the receiver,

certain options may not be able to be selected. Check the

table below for notes on this.

Use

/

to set it as necessary.

See the table below for the options available for each setting.

Press RETURN to confirm and exit the menu.

iPod

USB

NETWORK

STANDBY/ON

AUTO

DIRECT

ALC /

ADAPTER

ECO

D AUX A AUX

S.RTRV

L R

SL SR

SBL SBR SBL SBR

L R

SL SR

UPMIX OFF UPMIX ON

Setting/What it does Option(s)

MIDNIGHT/LOUDNESS

The MIDNIGHT allows you to hear effective

surround sound of movies at low volumes.

The LOUDNESS is used to get good bass and

treble from music sources at low volumes.

MID/LDN OFF

MIDNIGHT

LOUDNESS

BASS

Adjust the bass level to accentuate or

minimize the bottom end.

–6 to +6

Default: 0

AUDIO DISP

iPod

CTRL

UND

WING

DIMMER

TOP

TOOLS

VOL

RETURN

HOME MENU

STATUS

PORTABLE

SLEEP SP-AB

ENTER

RECEIVER

VSX-S300_SYXCN_En.book 24 ページ２０１１年４月８日　金曜日　午後８時１０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-S300-S Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-S300-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info