Bedienungsanleitung Pioneer VSX-S300-S (Seite 25 von 36) (Englisch)

491889

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Listening to your system

TREBLE

Adjust the treble level to accentuate or

minimize the bottom end.

–6 to +6

Default: 0

CH LEV (Channel Level)

Using the channel level settings, you can

adjust the overall balance of your speaker

system, an important factor when setting up a

home theater system.

–15 to +15

Default: 0

SB CH (Surround back channel processing)

You can have the receiver automatically use

6.1 or 7.1 decoding for 6.1 encoded sources

(for example, Dolby Digital EX or DTS-ES), or

you can choose to always use 6.1 or 7.1

decoding (for example, with 5.1 encoded

material). With 5.1 encoded sources, a

surround back channel will be generated, but

the material may sound better in the 5.1

format for which it was originally encoded (in

which case, you can simply switch surround

back channel processing off).

When ON is selected, matrix decoding

processing for generating the surround back

component from the surround component is

turned on.

When AUTO is selected, matrix decoding

processing for generating the surround back

component from the surround component is

switched automatically. Matrix decoding

processing is only performed when surround

back channel signals are detected in the input

signals.

When OFF is selected, matrix decoding

processing for generating the surround back

component from the surround component is

turned off.

AUTO

OFF

Setting/What it does Option(s)

PHASE CTRL (Phase Control)

Phase Control feature uses phase correction

measures to make sure your sound source

arrives at the listening position in phase,

preventing unwanted distortion and/or

coloring of the sound.

Phase Control technology provides coherent

sound reproduction through the use of phase

matching for an optimal sound image at your

listening position. The default setting is on

and we recommend leaving Phase Control

switched on for all sound sources.

OFF

EQ (Acoustic Calibration EQ)

Switches on/off the effect of Acoustic

Calibration EQ.

OFF

SOUND DELAY

Some monitors have a slight delay when

showing video, so the soundtrack will be

slightly out of sync with the picture. By adding

a bit of delay, you can adjust the sound to

match the presentation of the video.

0.0 to 9.0

(frames)

1 second = 25

frames (PAL)

Default: 0.0

SOUND RTRV (Sound Retriever)

When audio data is removed during the

compression process, sound quality often

suffers from an uneven sound image. The

Sound Retriever feature employs new DSP

technology that helps bring CD quality sound

back to compressed 2-channel audio by

restoring sound pressure and smoothing

jagged artifacts left over after compression.

OFF

DUAL (Dual monaural)

Specifies how dual mono encoded Dolby

Digital soundtracks should be played.

CH1 – Channel 1

is heard only

CH2 – Channel 2

is heard only

CH1 CH2 – Both

channels heard

from front

speakers

Setting/What it does Option(s)

FIXED PCM

This is useful if you find there is a slight delay

before OFF recognizes the PCM signal on a

CD, for instance.

When ON is selected, noise may be output

during playback of non-PCM sources. Please

select another input signal if this is a problem.

OFF

DRC (Dynamic Range Control)

Adjusts the level of dynamic range for movie

soundtracks optimized for Dolby Digital, DTS,

Dolby Digital Plus, Dolby TrueHD, DTS-HD

and DTS-HD Master Audio (you may need to

use this feature when listening to surround

sound at low volumes).

AUTO

MAX

MID

OFF

LFE ATT (LFE Attenuate)

Some Dolby Digital and DTS audio sources

include ultra-low bass tones. Set the LFE

attenuator as necessary to prevent the ultra-

low bass tones from distorting the sound from

the speakers.

The LFE is not limited when set to 0 dB, which

is the recommended value. When set to –15

dB, the LFE is limited by the respective

degree. When OFF is selected, no sound is

output from the LFE channel.

0dB

–5dB

–10dB

–15dB

–20dB

OFF

SACD GAIN

Brings out detail in SACDs by maximizing the

dynamic range (during digital processing).

0 (dB)

+6 (dB)

HDMI (HDMI Audio)

Specifies the routing of the HDMI audio signal

out of this receiver (AMP) or through to a TV

(THROUGH). When THROUGH is selected,

no sound is output from this receiver.

AMP

THROUGH

AUTO DELAY

This feature automatically corrects the audio-

to-video delay between components

connected with an HDMI cable. The audio

delay time is set depending on the operational

status of the display connected with an HDMI

cable. The video delay time is automatically

adjusted according to the audio delay time.

OFF

Setting/What it does Option(s)

VSX-S300_SYXCN_En.book 25 ページ２０１１年４月８日　金曜日　午後８時１０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-S300-S Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-S300-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info