Bedienungsanleitung Pioneer VSX-S500-S (Seite 12 von 56) (Englisch)

491888

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Connecting your equipment

Connect the surround back or front height

speakers

Connect the PRE OUT SURR BACK/FRONT HEIGHT outputs

of the unit and additional amplifier to add a surround back or

front height speaker.

• The Pre Out setting must be set if the above connections

are performed. Select Surr.Back if the surround back

speaker is connected and Height if the front height

speaker is connected (If neither the surround back

speaker nor the front height speaker is connected, either

setting will suffice) (see The Pre Out Setting on page 39).

• You can use the additional amplifier on the surround back

channel pre-outs for a single speaker as well. In this case

plug the amplifier into the left (L (Single)) terminal only.

Switching the speaker terminal

Three speaker system settings are possible.



Use SP-AB button to select a speaker terminal setting.

Press repeatedly to choose a speaker terminal option:

• SP:A ON – Sound is output from the speakers connected

to the A-speaker terminals and PRE OUT SURR BACK/

FRONT HEIGHT (multichannel playback is possible).

•

SP:B ON

– Sound is output from the two speakers connected

to the B-speaker terminals (only stereo playback is possible).

• SP:A+B ON – Sound is output from the A-speaker

terminals, the two speakers in the B-speaker terminals,

and the subwoofer. Multichannel sources are downmixed

only when the STEREO or STEREO ALC mode is selected

for stereo output from A- and B-speaker terminals.

• SP: OFF – No sound is output from the speakers.

Note

• SP:B ON and SP:A+B ON can only be selected when the

Speaker System is set to Speaker B (see Speaker System

on page 36).

• The subwoofer output depends on the settings you made

in Speaker Setting on page 37. However, if SP:B ON is

selected above, no sound is heard from the subwoofer

(the LFE channel is not downmixed).

• All speaker terminals are switched off when headphones

are connected.

Making cable connections

Make sure not to bend the cables over the top of this unit (as

shown in the illustration). If this happens, the magnetic field

produced by the transformers in this unit may cause a

humming noise from the speakers.

Important

• Before making or changing connections, switch off the

power and disconnect the power cord from the AC outlet.

• Before unplugging the power cord, switch the power into

standby.

HDMI cables

Both video and sound signals can be transmitted

simultaneously with one cable. If connecting the player and the

TV via this receiver, for both connections, use HDMI cables.

Be careful to connect the terminal in the proper direction.

Note

• Set the HDMI parameter in Setting the Audio options on

page 33 to THROUGH, if you want to hear HDMI audio

output from your TV (no sound will be heard from this

receiver).

• If the video signal does not appear on your TV, try

adjusting the resolution settings on your component or

display. Note that some components (such as video game

units) have resolutions that may not be displayed. In this

case, use a (analog) composite connection.

• When the video signal from the HDMI is 480i, 480p, 576i

or 576p, Multi Ch PCM sound and HD sound cannot be

received.

About HDMI

The HDMI connection transfers uncompressed digital video,

as well as almost every kind of digital audio that the

connected component is compatible with, including DVD-

Video, DVD-Audio, SACD, Dolby Digital Plus, Dolby TrueHD,

DTS-HD Master Audio (see below for limitations), Video CD/

Super VCD and CD.

This receiver incorporates High-Definition Multimedia

Interface (HDMI

) technology.

This receiver supports the functions described below through

HDMI connections.

• Digital transfer of uncompressed video (contents

protected by HDCP (1080p/24, 1080p/60, etc.))

• 3D signal transfer

• Deep Color signal transfer

• x.v.Color signal transfer

• Audio Return Channel

• Input of multi-channel linear PCM digital audio signals

(192 kHz or less) for up to 8 channels

• Input of the following digital audio formats:

– Dolby Digital, Dolby Digital Plus, DTS, High bitrate

audio (Dolby TrueHD, DTS-HD Master Audio), DVD-

Audio, CD, SACD (DSD 2 ch only), Video CD, Super VCD

• Synchronized operation with components using the

Control with HDMI function (see Control with HDMI

function on page 41)

Note

• Use a High Speed HDMI

cable. If HDMI cable other than

a High Speed HDMI

cable is used, it may not work

properly.

• When an HDMI cable with a built-in equalizer is

connected, it may not operate properly.

• 3D, Deep Color, x.v.Color signal transfer and Audio

Return Channel are only possible when connected to a

compatible component.

• HDMI format digital audio transmissions require a longer

time to be recognized. Due to this, interruption in the

audio may occur when switching between audio formats

or beginning playback.

HDMI

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-S500-S Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-S500-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info