Bedienungsanleitung Pioneer XDJ-AERO (Seite 17 von 37) (Englisch)

491973

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

Part names and functions

Setting Cue

1 During playback, press the [f (PLAY/PAUSE)]

button.

Playback is paused.

2 Press the [CUE ] button.

The point at which the track is paused is set as the cue point.

The [f (PLAY/PAUSE)] indicator flashes and the [CUE ] indicator

lights. No sound is output at this time.

! When a new cue point is set, the previously set cue point is canceled.

 Adjusting the cue point position

1 Turn the jog dial while pausing at a cue point.

The [f (PLAY/PAUSE)] and [CUE ] indicators flash.

The cue point can be fine-adjusted in units of 10 msec.

2 Press the [CUE ] button.

The position at which the button was pressed is set as the new cue point.

! When a new cue point is set, the previously set cue point is canceled.

 Returning to Cue Point (Back Cue)

During playback, press the [CUE

] button.

The set immediately returns to the currently set cue point and pauses.

! When the [f (PLAY/PAUSE)] button is pressed, playback starts

from the cue point.

 Checking Cue Point (Cue Point Sampler)

Keep pressing the [CUE

] button after returning to the

cue point.

Playback starts from the set cue point. Playback continues while the

button is held in.

Setting the loop automatically based on

the track’s tempo (Auto Beat Loop)

1 During playback, turn the [AUTO BEAT LOOP] control

to set the length for loop playback in number of beats.

The main unit display switches to the beat display.

2 Press the [AUTO BEAT LOOP] control to start loop

playback.

The loop out point is set automatically according to the track’s tempo

(BPM) and loop playback starts.

! Loop playback cannot be performed properly if the BPM value is not

displayed.

! When auto beat loop is set, the cue point moves to the loop in point.

! When the [AUTO BEAT LOOP] control is pressed during loop play-

back, loop playback is canceled.

Operating the jog dial

! The top of the jog dial has an embedded switch. Do not place objects

on the jog dial or subject it to strong forces.

! Water or other liquids getting into the set will lead to malfunction.

 Scratch

1 Press the [JOG DRUM] button.

The jog dial indicator lights blue.

Switch the jog dial to the VINYL mode.

2 During playback, press the top of the jog dial.

Playback stops.

3 Spin the jog dial in the desired direction and at the

desired speed.

The sound is played according to the direction and speed at which the

jog dial is spun by spinning the top of the jog dial while pressing it.

4 Release your hand from the top of the jog dial.

Normal playback resumes.

 Pitch bend

During playback, spin the outer section of the jog dial

without touching the top.

The playing speed increases when spun clockwise, decreases when

spun counterclockwise. When spinning is stopped, playback returns to

the normal speed.

 Jog drum

For details on the jog drum function, see Using the jog drum function on

page 26.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer XDJ-AERO Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer XDJ-AERO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info